Skip to content
Internet

Synology Drive Calculator

Synology Drive Calculator

Four drive bays, five RAID choices, and very different amounts of usable space. Enter your drive sizes and RAID type to plan the pool before you build it.

Enter 0 or leave blank for an empty bay.

SHR is the flexible default for mixed drive sizes. RAID 5 needs 3+ drives; RAID 10 needs 4.

Four 8 TB drives do not give you 32 TB of storage. Depending on the RAID type you choose, they give you anywhere from 16 TB to the full 32 TB, and the difference is the price of surviving a dead drive. That trade is the whole point of RAID planning: every level of protection costs a predictable slice of your raw capacity. The Synology Drive Calculator above plans the pool for a four-bay NAS. Enter the drive size in each bay, pick SHR or a classic RAID level, and it shows the usable pool capacity, how much raw space redundancy reserves, and what failures the pool can survive.

What This Tool Plans

This calculator answers a multi-drive question: once you combine the drives in your bays into one storage pool, how much usable space does the pool hold? It takes each bay’s drive size, applies the capacity math of the RAID type you selected, and reports the usable pool capacity plus the raw space set aside for redundancy. Unlike a per-disk capacity tool, which measures what one drive yields after formatting, this tool measures what the group of drives yields after the RAID layout takes its cut. The two tools stack: per-disk formatting tells you each drive’s true size, and this planner tells you how those drives combine under SHR, RAID 0, RAID 1, RAID 5, or RAID 10.

How to Use the Synology Drive Calculator

Enter the advertised drive size for each populated bay in terabytes, and enter 0 or leave the field blank for any empty bay. The calculator reads up to four bays, matching the classic four-bay Synology models. Next, choose the RAID type. SHR, Synology Hybrid RAID, is the flexible default that handles mixed drive sizes gracefully and is the right pick for most home users. RAID 0 stripes data for maximum space and speed with no protection. RAID 1 mirrors drives for maximum safety at the cost of capacity. RAID 5 spreads parity across three or more drives so any one can fail. RAID 10 mirrors pairs of drives and stripes across them, needing four drives. Press Calculate to see the usable pool capacity in large type, followed by the RAID type, the number of drives in the pool, the raw capacity, the space reserved for redundancy, and a plain-English description of the failure protection.

The RAID Capacity Formulas Explained

Every RAID level follows one simple rule for usable capacity, and the calculator applies exactly that rule. SHR with two or more drives behaves like RAID 5 for capacity purposes: usable = total raw space minus the largest drive, because one drive’s worth of space holds the redundancy data. With a single drive, SHR gives you the whole drive. RAID 0 has no redundancy at all: usable = the sum of all drives, which is why it is fast and roomy but dangerous. RAID 1 mirrors everything: usable = the size of the smallest drive, because every byte is duplicated; extra drives beyond two just add more mirrors of the same data. RAID 5 needs at least three drives: usable = total raw space minus the largest drive, surviving any single drive failure. RAID 10 needs four or more drives in an even count: usable = half of the total raw space, because each drive is mirrored.

The results are shown in both terabytes and tebibytes. The TiB figure uses the standard conversion factor of (1000 ÷ 1024)⁴, about 0.9095, so 24 TB of usable pool space reads as about 21.83 TiB. These are advertised-terabyte figures: they describe the pool before file-system formatting and DSM services take their additional share, which is why the result is the pool’s capacity, not the final free space you will see for files.

Worked Examples

Example one. Four 8 TB drives in RAID 5. Step one, the raw capacity is 8 + 8 + 8 + 8 = 32 TB across 4 drives, which satisfies the 3-drive minimum. Step two, RAID 5 reserves one drive’s worth of space for parity: 32 − 8 = 24 TB usable. Step three, convert to tebibytes: 24 × 0.9095 = 21.83 TiB. The calculator shows 24 TB (21.83 TiB) as the usable pool capacity, with 8 TB reserved for redundancy and protection against any single drive failure.

Example two. Mixed drives of 4, 4, 8, and 8 TB in SHR. Step one, the raw capacity is 4 + 4 + 8 + 8 = 24 TB across 4 drives. Step two, SHR with multiple drives reserves the largest drive: 24 − 8 = 16 TB usable. Step three, convert: 16 × 0.9095 = 14.55 TiB. The calculator shows 16 TB (14.55 TiB) usable, with 8 TB reserved for redundancy. This is where SHR earns its reputation: a classic RAID 5 would waste the extra 4 TB on each of the larger drives, but SHR uses the mixed sizes efficiently.

Example three. Two 4 TB drives in RAID 1. Step one, the raw capacity is 4 + 4 = 8 TB across 2 drives. Step two, mirroring means usable space equals the smallest drive: 4 TB. Step three, convert: 4 × 0.9095 = 3.64 TiB. The calculator shows 4 TB (3.64 TiB) usable, with 4 TB reserved for redundancy and protection against one drive failure. Half the raw space buys complete duplication, which is the right trade for irreplaceable data.

Understanding Your Results

The headline number is the usable capacity of the storage pool: the space the volume can offer before formatting and services. The RAID type row confirms the layout the math was based on, worth double-checking because SHR and RAID 5 can look similar in results. The drives row shows how many of the four bays are populated, which matters because empty bays are future expansion. The raw capacity row is the simple sum of your drives, the number the boxes promised. The redundancy row is the price of safety in terabytes: the space that holds parity or mirrors instead of your files. The failure protection row translates the math into plain risk: what happens when a drive dies. Read the redundancy and protection rows together whenever you compare two RAID types, because they show exactly what each extra terabyte of safety costs.

Common Mistakes to Avoid

The most common mistake is buying drives and assuming the box total is the pool size. Four 8 TB drives in RAID 5 give 24 TB, not 32 TB, and in RAID 10 they give 16 TB. The second mistake is choosing RAID 0 for the extra space and learning what no redundancy means during the first drive failure: the entire pool is lost. The third mistake is mixing drive sizes under classic RAID levels instead of SHR; RAID 5 treats every drive as the size of the smallest one for parts of the layout, stranding capacity that SHR would use. The fourth mistake is planning RAID 5 with only two drives or RAID 10 with three; the calculator will refuse, and so will DSM. The fifth mistake is forgetting that this pool capacity is pre-formatting: Btrfs, the DSM system partitions, snapshots, and the recycle bin all come out of this number afterward. Finally, remember that RAID is not a backup. It keeps the NAS running through a drive failure, but it does not protect against accidental deletion, ransomware, or fire, so keep a real backup of anything irreplaceable.

Frequently Asked Questions

1. What is SHR on a Synology NAS?

SHR, Synology Hybrid RAID, is Synology’s automated RAID system. It gives one-drive redundancy like RAID 5 but handles mixed drive sizes far better, and it lets you expand the pool later by swapping in larger drives one at a time.

2. How much usable space do four 8 TB drives give in RAID 5?

24 TB, which reads as about 21.83 TiB. RAID 5 reserves one drive’s worth of space for parity, so you lose 8 TB of the 32 TB raw total and the pool survives any single drive failure.

3. Is SHR or RAID 5 better for mixed drive sizes?

SHR is better. With 4, 4, 8, and 8 TB drives, SHR yields 16 TB usable, while classic RAID layouts strand the unmatched portions of the larger drives. For identical drives, SHR and RAID 5 give the same capacity.

4. What is the difference between RAID 1 and RAID 10?

RAID 1 mirrors two or more drives into one copy of the data, so usable space equals one drive. RAID 10 stripes data across mirrored pairs, needing four or more drives, giving half the raw total as usable space with better performance than RAID 1.

5. How many drives can fail in RAID 5?

One. RAID 5 survives any single drive failure. A second failure before the first is rebuilt destroys the pool, which is why fast rebuilds and hot spares matter on large arrays.

6. Can I add a drive to my SHR pool later?

Yes, that is SHR’s signature feature. Add a drive of equal or larger size than the largest existing drive, and DSM expands the pool without rebuilding from scratch. The calculator’s drives row shows how many bays you still have free.

7. Why does RAID 10 only give half the raw space?

Because every byte is stored twice. RAID 10 builds mirrored pairs and then stripes across them, so with four 8 TB drives you get 16 TB usable and outstanding fault tolerance and speed.

8. What happens if I use RAID 0 and a drive fails?

You lose the entire pool. RAID 0 stripes data across all drives with no redundancy, so one dead drive takes everything with it. It is suitable only for temporary or easily recreated data.

9. Does the calculator account for the TB to TiB conversion?

Yes. The headline result shows both units, converting at (1000 ÷ 1024)⁴, about 0.9095. Your NAS reports space in TiB, so the TiB figure is the one to compare against Storage Manager.

10. Should I use 4 bays or leave one empty?

Populating all four bays maximizes both capacity and redundancy options, since RAID 5 and RAID 10 need three and four drives. Leaving a bay empty only makes sense if you plan to add a larger drive soon.

11. How much space does redundancy cost in SHR?

One drive’s worth: the size of the largest drive in the pool. With 4, 4, 8, and 8 TB drives, redundancy costs 8 TB and the pool survives one drive failure.

12. Can I change RAID types later without losing data?

DSM allows some migrations, such as RAID 1 to RAID 5 by adding drives, and SHR expansion by replacing drives. Downgrading or switching families usually requires backing up, rebuilding, and restoring.

13. Is RAID a backup?

No. RAID protects against drive failure, not against deletion, corruption, ransomware, theft, or fire. Keep an independent backup of anything you cannot afford to lose, ideally off-site.

14. What drive sizes work best together?

Identical drives are simplest and waste nothing under any RAID level. If you mix sizes, use SHR, and make the new drives equal to or larger than the largest existing drive for smooth expansion.

15. Does this include formatting overhead?

No. This planner works in advertised terabytes and stops at the RAID layer. File-system formatting, the DSM system partitions, snapshots, and the recycle bin reduce the final free space further.

Final Thoughts

Planning a Synology pool is a two-minute exercise that saves expensive surprises: count the bays, add the drives, and let the RAID math show the real capacity before you buy or build. The Synology Drive Calculator turns that exercise into a habit, showing the usable pool, the cost of redundancy, and the failure protection side by side for every RAID type. Pick the protection your data deserves, remember that RAID is uptime and not backup, and build the pool once, correctly.