Steroid Conversion Calculator
Convert a corticosteroid dose into its equivalent dose of another steroid. Educational only — not medical advice.
Corticosteroids are among the most widely prescribed medicines in the world — used for asthma flare-ups, allergic reactions, arthritis, skin conditions, and dozens of other inflammatory problems. But “steroid” is a family name, not a single drug, and the family members differ enormously in strength: 0.75 mg of dexamethasone packs roughly the same anti-inflammatory punch as 20 mg of hydrocortisone. Whenever a prescription switches from one steroid to another, someone has to translate the dose so the patient keeps getting the same effect. The Steroid Conversion Calculator above performs that translation using the standard equivalence table, with every step shown.
An essential warning comes first and bears repeating: this calculator is an educational tool, not medical advice. Steroid doses affect hormones, immunity, blood sugar, bones, and mood, and changing a dose — especially stopping one — can be dangerous without medical supervision. Use the calculator to understand equivalences, satisfy curiosity, or double-check your understanding, and leave every real dosing decision to your clinician or pharmacist.
What the Steroid Conversion Calculator Does
The Steroid Conversion Calculator converts a dose of one corticosteroid into the approximately equivalent dose of another. You enter the dose in milligrams, choose the steroid you are converting from and the steroid you are converting to, and the calculator returns the equivalent dose — for example, that 20 mg of prednisone is approximately 80.00 mg of hydrocortisone. Alongside the headline answer, it shows a three-step breakdown: the standard equivalence it used, the conversion ratio, and the final multiplication.
It also displays the same dose expressed in all five supported steroids — hydrocortisone, prednisone, prednisolone, methylprednisolone, and dexamethasone — so you can compare the whole family at a glance. The word “approximately” matters: these are anti-inflammatory equivalences used for education and comparison, and real prescribing also weighs how long each drug acts, its salt-retaining effects, and the patient’s condition.
How to Use the Steroid Conversion Calculator
Type the dose in milligrams into the Dose field — for example 20. Choose the starting steroid in the “Convert from” dropdown and the target steroid in the “Convert to” dropdown, then press Calculate. The headline result appears immediately, followed by the step-by-step math and the full five-steroid comparison table. Press Reset to clear everything for a new conversion.
If the calculator shows an error, it is guiding you: a missing or zero dose, or a steroid choice that did not register. The calculator accepts any positive dose, including decimals such as 2.5 mg. Converting a steroid to itself is allowed and simply returns the same dose with a ratio of 1 — a handy way to sanity-check that you are reading the table correctly.
The Five Corticosteroids and Their Relative Strengths
All dose conversions rest on one standard table of anti-inflammatory equivalences, measured against hydrocortisone. The widely used values are: 20 mg hydrocortisone = 5 mg prednisone = 5 mg prednisolone = 4 mg methylprednisolone = 0.75 mg dexamethasone. Read that line carefully and the pattern is clear: dexamethasone is the heavyweight, roughly 25 to 27 times as potent per milligram as hydrocortisone, while prednisone and prednisolone sit in the middle at four times hydrocortisone’s strength per milligram.
Hydrocortisone is the body’s own stress hormone in drug form and the reference point for the table. Prednisone and prednisolone are workhorses for medium-term treatment; prednisone is converted by the liver into prednisolone, which is why their equivalent doses are identical. Methylprednisolone is slightly stronger per milligram and often chosen when a bit more potency is wanted. Dexamethasone is the long-acting, high-potency option — powerful in tiny milligram amounts, which is why its doses look surprisingly small next to the others.
The Conversion Formula
The calculator converts through simple proportional math. Each steroid has an “equivalent milligrams” number from the table above — call it E. The conversion ratio from steroid A to steroid B is E(B) ÷ E(A), and the converted dose is:
Equivalent dose = your dose × (E(target) ÷ E(source)).
Take 20 mg of prednisone converted to hydrocortisone: E(prednisone) = 5 and E(hydrocortisone) = 20, so the ratio is 20 ÷ 5 = 4, and 20 mg × 4 = 80.00 mg of hydrocortisone. The formula works in every direction, including from a strong steroid to a weaker one, where the ratio is a fraction and the milligram number grows — 8 mg of dexamethasone becomes a much larger-looking number of prednisone milligrams, even though the effect is equivalent.
Worked Examples
Example 1 — prednisone to hydrocortisone. Convert 20 mg of prednisone. Enter 20, choose “Prednisone” as the source and “Hydrocortisone” as the target, and press Calculate. Step one: the standard equivalence is 5 mg prednisone = 20 mg hydrocortisone. Step two: the conversion ratio is 20 ÷ 5 = 4. Step three: 20 mg × 4 = 80.00 mg hydrocortisone. The comparison table also shows the same dose as 20.00 mg prednisolone, 16.00 mg methylprednisolone, and 3.00 mg dexamethasone.
Example 2 — dexamethasone to prednisone. Convert 8 mg of dexamethasone. Enter 8, choose “Dexamethasone” and “Prednisone,” and press Calculate. Step one: 0.75 mg dexamethasone = 5 mg prednisone. Step two: the ratio is 5 ÷ 0.75 = 6.6667. Step three: 8 mg × 6.6667 = 53.33 mg prednisone. The full table reads 213.33 mg hydrocortisone, 53.33 mg prednisolone, 42.67 mg methylprednisolone, and 8.00 mg dexamethasone — notice how the weaker steroids need far more milligrams for the same effect.
Example 3 — methylprednisolone to prednisone. Convert 16 mg of methylprednisolone. Enter 16, choose “Methylprednisolone” and “Prednisone,” and press Calculate. Step one: 4 mg methylprednisolone = 5 mg prednisone. Step two: the ratio is 5 ÷ 4 = 1.25. Step three: 16 mg × 1.25 = 20.00 mg prednisone. These two drugs are close in strength, so the conversion is nearly one-to-one.
Understanding Your Results
The headline result is the equivalent dose rounded to two decimal places — plenty of precision for comparison, since real tablets and clinical rounding rarely need more. The three steps beneath it let you verify the exact equivalence and ratio used, which is useful if you are studying pharmacology or checking a reference. The comparison table is the broader view: one dose, five expressions, making the potency ladder visible in a single glance.
Remember what the table does not capture. Dexamethasone acts much longer than hydrocortisone, so equal anti-inflammatory doses are not equal in duration. Hydrocortisone retains salt and water far more than dexamethasone, which has almost no mineralocorticoid activity — a difference that matters enormously in conditions like adrenal insufficiency, where the salt-retaining effect is part of the treatment. Equivalences are a starting point for understanding, never the whole clinical picture.
Safety Notes and Common Mistakes
The most dangerous mistake is treating an equivalence as a prescription. Never start, stop, raise, or lower a steroid on the basis of a conversion alone — abrupt changes after more than a couple of weeks of use can trigger adrenal crisis, a medical emergency. Tapering schedules are individualized, and only your prescriber can design one safely. Second, do not confuse anti-inflammatory equivalence with total equivalence: duration of action and salt-retaining effects do not convert by the same ratio. Third, double-check which steroid you selected in each dropdown — dexamethasone’s tiny numbers make a wrong-drug slip easy and consequential. Fourth, keep units straight: the calculator works in milligrams throughout, so convert any microgram doses to milligrams before entering them. Finally, remember that prednisone needs liver activation while prednisolone does not, which is one reason clinicians sometimes prefer prednisolone in liver disease even though their equivalent doses match.
Frequently Asked Questions
1. What is a corticosteroid?
It is a medicine that mimics cortisol, the body’s natural stress hormone, and powerfully reduces inflammation and immune responses. Common examples include prednisone, hydrocortisone, and dexamethasone.
2. Why do different steroids need dose conversion?
Because they differ in potency per milligram. A milligram of dexamethasone is far stronger than a milligram of hydrocortisone, so switching drugs requires recalculating the dose to keep the anti-inflammatory effect the same.
3. What is the standard equivalence table?
The widely used reference is: 20 mg hydrocortisone = 5 mg prednisone = 5 mg prednisolone = 4 mg methylprednisolone = 0.75 mg dexamethasone. This calculator uses exactly these values.
4. How do you convert prednisone to hydrocortisone?
Multiply the prednisone dose by 4, since 5 mg of prednisone equals 20 mg of hydrocortisone. So 20 mg of prednisone is approximately 80 mg of hydrocortisone.
5. How do you convert dexamethasone to prednisone?
Multiply the dexamethasone dose by 6.6667, because 0.75 mg of dexamethasone equals 5 mg of prednisone. So 8 mg of dexamethasone is approximately 53.33 mg of prednisone.
6. Are prednisone and prednisolone the same dose?
For conversion purposes, yes — both equal 5 mg in the standard table, so their doses translate one-to-one. The difference is that prednisone must be activated by the liver while prednisolone is already active.
7. Why is dexamethasone dosed in such small milligrams?
Because it is roughly 25 times more potent per milligram than hydrocortisone. Small milligram numbers deliver large effects, which is normal for this drug and not a sign of a weak dose.
8. Does this calculator give medical advice?
No. It is an educational tool that performs standard arithmetic conversions. It does not account for your condition, other medicines, or how long you have been treated, and it must never replace a clinician’s judgment.
9. Can I use this to taper my steroid dose?
No. Tapering must be designed and supervised by your prescriber. Stopping or reducing steroids too quickly can cause adrenal insufficiency, which is dangerous.
10. Do these conversions account for how long the drug lasts?
No. The table compares anti-inflammatory strength only. Dexamethasone acts for 36 to 72 hours while hydrocortisone acts for 8 to 12, so equal-strength doses still behave differently over time.
11. What is mineralocorticoid activity, and does it convert too?
It is the salt-and-water-retaining effect. Hydrocortisone has strong mineralocorticoid activity and dexamethasone has almost none, and this difference does not follow the anti-inflammatory ratio — another reason conversions are only part of the story.
12. Are creams or inhalers converted the same way?
No. The standard table applies to systemic doses (tablets and injections). Topical, inhaled, and eye-drop steroids use different potency scales and cannot be converted with this calculator.
13. Why do results show two decimal places?
Two decimals give enough precision for comparison without implying false exactness. In practice, doses are rounded to available tablet strengths by the prescriber.
14. What if my steroid is not in the list?
The calculator covers the five most commonly compared systemic corticosteroids. Others, such as betamethasone or triamcinolone, need their own reference values — ask your pharmacist for the equivalent dose.
15. Should I double-check a conversion with my pharmacist?
Absolutely. Pharmacists verify steroid conversions routinely and can catch unit mix-ups or wrong-drug selections. When in doubt, a two-minute conversation beats any calculator.
Final Thoughts
Steroid dose conversion is simple arithmetic wrapped around an important idea: milligrams are not interchangeable between drugs, and the same number can mean wildly different strengths depending on which steroid it belongs to. The Steroid Conversion Calculator makes the standard equivalences transparent — ratio shown, multiplication shown, whole family compared — so the math is never a mystery. Keep its limits firmly in mind: it compares anti-inflammatory strength, not duration or salt retention, and it is an educational instrument, not a prescriber. For every real-world dose decision, the final authority is the clinician who knows your history, not a conversion table.