Skip to content
tool

Rgb Color Calculator

Rgb Color Calculator

Pick two colors and a blend ratio to see the mixed result.

Color 1

R
G
B

Color 2

R
G
B
50%

Finding the perfect shade often means blending two colors instead of picking one. Maybe you want a softer version of your brand red, a custom gradient midpoint, or the exact tone halfway between two favorites. This RGB color calculator mixes any two RGB colors at any ratio you choose, then shows the resulting color as a live swatch with its HEX code and exact RGB values.

What This Calculator Does

You enter two colors as RGB values, Color 1 and Color 2, and set a mix ratio with the slider. A ratio of 50 percent blends the two colors equally, 0 percent gives you Color 1 unchanged, and 100 percent gives you Color 2 unchanged. The calculator averages each channel separately using your ratio and rounds to the nearest whole number, because screens need whole values. The result appears as a large preview swatch so you can see the blend, along with the mixed color’s HEX code and its rgb() string, ready to copy into your design tool or stylesheet. Every input is validated, so a typo like 300 or an empty field produces a helpful message instead of a wrong color.

How to Use This Calculator

Start by typing the red, green, and blue values of Color 1 on the left, using whole numbers from 0 to 255. Then type the values of Color 2 on the right. Drag the mix ratio slider to decide how much of Color 2 to blend in: slide left for more of Color 1, right for more of Color 2, and leave it in the middle for an even mix. The percentage label updates as you drag. Press Calculate to mix the colors and see the swatch, HEX code, and RGB values. The Reset button clears everything so you can try a new pair. If you already know HEX codes, convert them to RGB first, because this mixer works with RGB numbers.

How Color Mixing Works

Digital color mixing blends light, not paint, so the math is a weighted average. For each channel, the mixed value equals Color 1 plus the difference between Color 2 and Color 1 multiplied by the ratio. At 50 percent, each channel is simply the average of the two colors. At 25 percent, the result stays three-quarters of the way toward Color 1. Because screens cannot display fractions of a color level, each result is rounded to the nearest whole number between 0 and 255. One surprise for beginners: mixing two bright colors of light can produce gray. Blend pure yellow light with pure blue light at 50 percent and you get a neutral gray, not green, because you are averaging light levels rather than stirring pigments.

Worked Examples With Full Arithmetic

Example one: mix red, which is 255, 0, 0, with blue, which is 0, 0, 255, at 50 percent. For the red channel, the mixed value is 255 plus (0 minus 255) times 0.5, which is 255 minus 127.5, which rounds to 128. The green channel is 0 plus (0 minus 0) times 0.5, which is 0. The blue channel is 0 plus (255 minus 0) times 0.5, which is 127.5, rounding to 128. The mixed color is rgb(128, 0, 128). Convert to HEX: 128 divided by 16 is 8 with a remainder of 0, so 128 becomes 80, giving #800080, a rich purple.

Example two: mix white, 255, 255, 255, with black, 0, 0, 0, at 25 percent. For each channel, the mixed value is 255 plus (0 minus 255) times 0.25, which is 255 minus 63.75, rounding to 191. All three channels give 191, so the mixed color is rgb(191, 191, 191). Convert 191 to HEX: 191 divided by 16 is 11 with a remainder of 15, and in hexadecimal 11 is B and 15 is F, so 191 becomes BF. The result is #BFBFBF, a light silver gray, three-quarters of the way from black to white.

Example three: mix yellow, 255, 255, 0, with blue, 0, 0, 255, at 50 percent. The red channel is 255 plus (0 minus 255) times 0.5, which rounds to 128. The green channel is also 255 plus (0 minus 255) times 0.5, rounding to 128. The blue channel is 0 plus (255 minus 0) times 0.5, rounding to 128. The mixed color is rgb(128, 128, 128), which is #808080, a perfect middle gray. This surprises painters, but it is exactly what averaging light levels produces.

Practical Uses for Color Mixing

Designers use color mixing constantly. Blend your brand color with white to create lighter tints for backgrounds, or with black for darker shades for text and borders. Mix two brand colors to find a harmonious accent for buttons and highlights. When building a gradient, the midpoint color from a 50 percent mix gives you a smooth center stop. Bloggers matching a photo to their site palette can blend a sampled color with their brand color until it feels right. Because the calculator shows both HEX and RGB, the result drops straight into any stylesheet, design tool, or theme customizer.

Common Mistakes to Avoid

The biggest mistake is expecting paint-like results. Mixing red and blue paint gives a different purple than mixing red and blue light, because light adds and paint subtracts. Another common error is entering a value above 255 or leaving a field empty, which the calculator will flag. Some people set the ratio slider to 50 percent but mentally treat it as mostly Color 1: remember that the slider measures how much of Color 2 is blended in. A subtler mistake is mixing colors and judging the result on an uncalibrated screen, then being surprised when it looks different on a phone. Finally, do not forget that rounded values are approximations: a 33 percent mix can land on a fraction that rounds up or down, so check the swatch rather than assuming exact symmetry.

Frequently Asked Questions

1. What does this color mixer do?

It blends two RGB colors at a ratio you choose and shows the resulting color. You get a preview swatch, the HEX code, and the exact RGB values of the mix, all calculated with a weighted average of each channel.

2. What does the mix ratio mean?

The ratio is the percentage of Color 2 blended into the mix. At 0 percent you get Color 1 unchanged, at 50 percent you get an even blend, and at 100 percent you get Color 2 unchanged. Values in between lean toward one side.

3. Why did mixing yellow and blue give me gray?

Because screens mix light, not paint. Yellow light is red plus green at full power, and averaging that with blue light balances all three channels equally, which is the definition of gray. Painters get green because pigments subtract light instead of adding it.

4. How is the mixed color calculated?

Each channel is mixed separately with a weighted average: Color 1 plus the difference between Color 2 and Color 1 times the ratio. The result is rounded to the nearest whole number, since screens need whole RGB values.

5. How do I make a lighter tint of a color?

Set Color 1 to your color and Color 2 to white, which is 255, 255, 255, then choose a low ratio like 20 or 30 percent. The higher the ratio, the lighter the tint becomes.

6. How do I make a darker shade of a color?

Set Color 1 to your color and Color 2 to black, which is 0, 0, 0, then choose a ratio like 20 or 30 percent. More black in the mix means a deeper, darker shade.

7. Can I find the midpoint of a gradient?

Yes. Enter your two gradient endpoint colors and set the ratio to 50 percent. The mixed color is the exact mathematical midpoint, which works perfectly as a center stop in a three-stop gradient.

8. Why are the results rounded?

Because RGB channels only accept whole numbers from 0 to 255. A 33 percent mix of 0 and 255 lands on 84.15, which the calculator rounds to 84. The rounding error is invisible to the eye.

9. What is the difference between this and an RGB to HEX converter?

A converter translates one color between formats, while this mixer creates a brand-new color by blending two of them. Use the converter when you know the color you want, and the mixer when you are inventing a new shade.

10. Can I mix more than two colors?

Not in one step, but you can chain mixes: blend the first two colors, then mix the result with a third color. A 50 percent mix of a mix with a third color gives each original color a fair share of the final blend.

11. Do I need HEX codes to use this?

No, the mixer works with RGB numbers only. If you only have HEX codes, split each six-digit code into three pairs and convert them to decimal first, then enter those numbers.

12. Why does the swatch matter?

Because numbers alone do not tell you whether a blend looks good. The swatch lets you judge the actual result instantly, which is the whole point of mixing: finding a shade that looks right, not just one that is mathematically correct.

13. Will the mixed color look the same everywhere?

Almost. The math is exact, but every screen renders color slightly differently. For brand-critical work, preview the HEX code on the devices your audience uses before committing to it.

14. What values can the ratio slider take?

Any whole number from 0 to 100 percent. The label next to the slider always shows the current value, so you know exactly how much of Color 2 is going into the blend.

15. Is this mixer free to use?

Yes, completely free with no limits. Mix as many color pairs as you like; everything runs in your browser and none of your colors are sent anywhere.

Final Thoughts

Great color palettes are rarely found; they are mixed. Whether you are softening a brand color, building a gradient midpoint, or inventing an accent from scratch, this RGB color calculator gives you the exact blend with its HEX code and RGB values in one step. Try a few ratios, trust the swatch, and copy the result straight into your design.