Skip to content
Math & Scientific

Prove Identity Calculator

Prove Identity Calculator

Type the two sides of a trig identity and watch them match, angle by angle.

Allowed: x, pi, + – * / ^, parentheses, sin cos tan sec csc cot asin acos atan sqrt cbrt abs ln log exp

You have just finished a page of algebra and you believe the two sides are equal. But belief is not proof — and one wrong sign three lines back can sink the whole argument.

The Prove Identity Calculator gives you a fast reality check. Type the left-hand side and the right-hand side as expressions in x, and it evaluates both at ten sample angles, marking every match, mismatch, and undefined point.

If all ten agree, your algebra is almost certainly right. If they diverge, you know exactly where to look.

What Does the Prove Identity Calculator Do?

It numerically verifies trigonometric identities. You supply the two sides of a claimed identity, and the calculator tests them at 0°, 15°, 30°, 45°, 60°, 75°, 90°, 120°, 180°, and 270°.

Each angle gets a row showing the left value, the right value, and a check: match, differs, or skipped as undefined. A verdict banner summarizes the sweep.

Three classic identities ship as presets — the Pythagorean identity, the tangent-secant identity, and the double-angle sine — so you can see a successful check before typing your own.

How to Use the Prove Identity Calculator

Pick a preset from the dropdown or leave Custom identity selected. Type the left side into the first box and the right side into the second, using x for the angle.

Choose degrees or radians for the angle labels. The math is identical either way; only the display changes.

Press Calculate and the ten-row table appears. If an expression cannot be read — a misspelled function or unbalanced parentheses — a message says so instead. Press Reset to clear the form.

The Ten-Angle Sweep: How the Check Works

The angle set is deliberate. It includes the friendly angles (0°, 30°, 45°, 60°, 90°) where trig values are exact, plus awkward ones (15°, 75°, 120°, 270°) where a fake identity is more likely to slip.

At each angle both sides are computed to full floating-point precision and compared within a tolerance of one part in a billion. Anything closer than that counts as a match.

Ten agreements do not constitute a formal proof — no finite sample can. But an identity that survives 0° through 270° including the awkward angles is overwhelmingly likely to be genuine.

Writing Expressions the Calculator Understands

Use x for the angle and pi for π. The operators are +, −, *, /, and ^ for powers, with parentheses for grouping.

The function list covers sin, cos, tan, sec, csc, cot, the inverse functions asin, acos, atan, plus sqrt, cbrt, abs, ln, log, and exp. Names are not case-sensitive, so Sin(x) works as well as sin(x).

Multiplication can be implicit: 2x, 2(x+1), and x sin(x) are all read correctly. Powers bind tighter than unary minus, so write (−x)^2 with parentheses when you mean the square of negative x.

Degrees or Radians: Does It Matter?

For the verdict, no. The sample angles are the same geometric positions either way — 90° and π/2 are the same direction, just different labels.

The toggle exists for comfort. If your class works in radians, reading 1.571 rad next to a row feels more natural than 90°; the numbers in the value columns are unchanged.

One caution: if you type an expression containing pi yourself, like sin(x + pi), the angle variable still sweeps the same positions. The toggle never rescales anything inside your expressions.

Worked Example: sin²x + cos²x = 1

First: choose the Pythagorean preset, or type sin(x)^2 + cos(x)^2 on the left and 1 on the right.

At 30°, the left side is 0.5² + 0.8660² = 0.25 + 0.75 = 1.0000, and the right side is 1.0000.

Then: press Calculate and watch all ten rows light up with matches.

The verdict reads that the identity holds at all 10 testable angles. This is the identity every other check is measured against.

Worked Example: 1 + tan²x = sec²x

First: type 1 + tan(x)^2 on the left and sec(x)^2 on the right.

At 45°, tan 45° = 1, so the left side is 1 + 1 = 2.0000; sec 45° = √2, and squared that is 2.0000.

Then: run the sweep and note the 90° row — both sides are undefined there, so it is skipped, not failed.

The verdict reports a hold at the 9 testable angles. Skipped angles are normal wherever a denominator hits zero.

Worked Example: sin(2x) = 2 sin x cos x

First: type sin(2*x) on the left and 2*sin(x)*cos(x) on the right.

At 30°, the left side is sin 60° ≈ 0.8660, and the right side is 2 × 0.5 × 0.8660 ≈ 0.8660.

Then: all ten rows match, including 270°, where both sides read −1.0000.

This is the double-angle identity — the same pattern behind half-angle and power-reduction formulas, all checkable the same way.

Worked Example: When the Sides Do Not Match

First: type sin(x) + cos(x) on the left and 1 on the right — a tempting but false claim.

At 30°, the left side is 0.5 + 0.8660 = 1.3660, which is not 1.0000.

Then: the verdict reports that this is not an identity, listing the angles where the sides differ.

Interestingly, the 0° and 90° rows do match (both give 1.0000) — which is exactly why spot-checking a single angle is dangerous, and why the calculator sweeps ten.

Why Undefined Angles Are Skipped, Not Failed

Functions like tan, sec, csc, and cot blow up at certain angles — tan 90° has no finite value. A row where either side is undefined cannot be a match or a mismatch, so the calculator marks it skipped.

This is mathematically honest. The identity 1 + tan²x = sec²x is true wherever both sides are defined; the undefined points are holes in the domain, not counterexamples.

If every angle is skipped, the calculator says so plainly instead of declaring victory. An expression like 1/0 has nothing testable, and the tool refuses to bless it.

Common Prove Identity Mistakes

The most common is a syntax slip: forgetting that the calculator needs explicit function parentheses, writing sin x instead of sin(x). The parser requires the parentheses.

Another is testing only the friendly angles by hand and declaring victory. The false identity above passes at 0° and 90° — the awkward angles are where impostors get caught.

People also misread skipped rows as failures. A skip means undefined, not wrong; check whether the undefined angle is a genuine domain hole before worrying.

Where Numeric Identity Checks Are Useful

Students use them to verify homework before submitting. Catching an algebra slip in ten seconds beats losing marks for it.

Teachers use them to generate counterexamples. When a student proposes a false identity, the table shows exactly where it breaks.

Engineers and programmers use them to validate trig simplifications inside signal-processing or graphics code, where a wrong identity becomes a wrong pixel or a wrong sample.

What a Numeric Check Cannot Prove

Ten angles are not all angles. In principle, two expressions could agree at every sample and diverge somewhere between them — though for the smooth functions in the allowed list, that would be extraordinarily perverse.

A numeric check also cannot show you why an identity holds. It confirms the what, never the how; the insight still comes from the algebra.

Use the calculator as a verifier, not a replacement for proof. Let it catch your mistakes, then write the real argument yourself.

How to Interpret Your Result Correctly

A green verdict with ten matches means your identity survived a serious stress test. Proceed with confidence — but still write the algebraic proof.

A red verdict names the failing angles. Recompute both sides by hand at the first failing angle; the arithmetic usually reveals which line of your working went wrong.

Skipped rows deserve a glance, not alarm. Confirm they sit at genuine singularities (90° for tan, 0° for csc), and move on.

Frequently Asked Questions

1. Does ten matching angles prove the identity?

Not formally — no finite sample covers every real number. But for smooth trigonometric expressions, ten well-chosen angles including awkward ones like 15° and 75° is overwhelming evidence.

Think of it as a lie detector for algebra: it catches mistakes with near certainty, even though a determined adversary could theoretically fool it.

2. What should I type for sin²x?

Type sin(x)^2. The caret means “to the power of”, so sin(x)^2 squares the sine, exactly like sin²x on paper.

Avoid writing sin^2(x) — the calculator reads function names as whole words and will not understand the exponent stuck in the middle.

3. Why is 90° skipped for tan identities?

Because tan 90° is undefined — cosine is zero there, and you cannot divide by zero. Any expression containing tan(90°) has no finite value.

The calculator marks such rows as skipped rather than failed, since an undefined point is a hole in the domain, not a counterexample.

4. Can I check identities with two variables, like sin(x+y)?

No. This calculator sweeps a single variable x. Two-variable identities need a grid of test points, which is a different tool.

You can still verify the single-variable special cases — for example, set y to a constant like 45° and check sin(x + 45°) against its expansion.

5. What does the tolerance of 1e-9 mean?

Two sides count as matching when they differ by less than 0.000000001. That absorbs the tiny rounding errors of floating-point arithmetic.

Real mismatches from wrong algebra are vastly larger — usually 0.01 or more — so the tolerance never hides a genuine error.

6. Why did my identity fail at only one angle?

Single-angle failures usually signal a domain edge or a branch issue rather than a totally wrong identity. Check whether that angle makes something undefined or pushes an inverse function across a branch cut.

If the failing angle is ordinary, recompute both sides by hand there — one of them will reveal the algebra slip.

7. Are function names case-sensitive?

No. Sin(x), SIN(x), and sin(x) all work. The calculator lowercases names before looking them up.

The variable must still be a lowercase x, and pi must be lowercase — those are the documented spellings.

8. Can I use degrees inside the expression?

The variable x always sweeps the same geometric angles; the degrees/radians toggle only changes the labels. If you want degree-flavored constants, write them with pi, like sin(x + pi/6) for a 30° shift.

There is no separate degree-mode trigonometry inside the expressions — everything is computed the same way.

9. What is the difference between “differs” and “skipped”?

Differs means both sides produced finite numbers that disagree — a genuine counterexample. Skipped means at least one side was undefined at that angle.

A red differs row kills the identity. A gray skipped row is just a hole in the domain.

10. Why these ten angles specifically?

They mix friendly angles (0°, 30°, 45°, 60°, 90°) with awkward ones (15°, 75°, 120°, 270°). False identities often survive the friendly angles — the worked non-example passes at 0° and 90° — so the awkward ones do the real work.

The spread also covers all four quadrants, catching sign errors that hide in the first quadrant.

11. My expression will not parse. What is wrong?

Check three things: every function needs parentheses (sin(x), not sin x), every opening parenthesis needs a closing one, and only the documented names are allowed.

The error message appears where the result would be, describing which side failed. Fix that side and try again.

12. Can the calculator show steps of a proof?

No — it verifies numerically, it does not do algebra. It tells you whether the identity holds, not how to derive it.

For strategy guidance on the algebraic side, the companion proving calculators walk through common approaches like converting to sines and cosines.

13. Is implicit multiplication really supported?

Yes. You can write 2x, 2(x+1), and x sin(x), and the calculator inserts the multiplication signs for you.

When in doubt, add the asterisk explicitly — 2*x always works and is never misread.

14. Why does the verdict mention “testable” angles?

Because skipped angles were not tested — nothing can be concluded from an undefined value. Saying “10 testable angles” is precise about what was actually checked.

If some angles were skipped, glance at them to confirm they are genuine singularities before accepting the verdict.

15. Can I trust this for an exam?

Use it while studying to check your practice proofs — that is exactly what it is for. In the exam room itself, you will need the algebra, since the tool will not be there.

Students who verify every practice identity tend to internalize the patterns faster, because the instant feedback corrects mistakes before they become habits.