Skip to content
Others

Osrs Dps Calculator

Osrs Dps Calculator

Enter your max hit, attack speed in ticks, and accuracy to find your Old School RuneScape damage per second (DPS).

When Old School RuneScape players argue about which weapon is best, the argument is really about one number: DPS, or damage per second. Max hit alone does not settle it — a slow weapon that hits 40s can easily lose to a fast weapon that hits 20s, and a weapon that misses half the time is worth far less than its max hit suggests. DPS combines all three factors — how hard you can hit, how often you hit, and how fast you attack — into a single number that lets you compare any two setups fairly. The Osrs Dps Calculator takes your max hit, your weapon’s attack speed in ticks, and your accuracy percentage, and returns your theoretical damage per second, along with the average hit, damage per attack, and attack interval that feed into it. This guide explains what each input means, the exact formula, three worked examples with full arithmetic, and the common mistakes that make DPS comparisons misleading.

What the Osrs Dps Calculator Does

The calculator takes three inputs — max hit, attack speed in game ticks, and accuracy as a percentage — and computes your damage per second. The headline result is the DPS figure itself. The breakdown shows every intermediate value: your average hit (max hit divided by 2), your accuracy, your expected damage per attack (accuracy times average hit), your attack interval in both ticks and seconds, and finally the DPS. Why those intermediates matter: DPS is a compound number, and two setups can reach the same DPS through completely different routes. Seeing the pieces lets you diagnose your build — if your DPS is low because your accuracy is 40%, no weapon upgrade will fix what better gear bonuses or a defence-reducing special attack would. The breakdown turns a single number into actionable information. The calculator uses the standard community DPS model: hits are assumed to be uniformly distributed between 0 and your max hit (so the average hit is max ÷ 2), each game tick lasts 0.6 seconds, and accuracy is your chance to land a hit expressed as a percentage. It is a theoretical long-run average — real kills bounce around it because of RNG — but it is the same model the OSRS DPS spreadsheets and community calculators use.

How to Use the Osrs Dps Calculator

You need three numbers, all of which you can find in-game or in a max hit calculator: 1. Max hit: Enter the highest damage your setup can deal in one hit, as a whole number. This depends on your Strength level, Strength bonus, prayers, and potions — use a max hit calculator or your in-game combat stats to get it right. 2. Attack speed (ticks): Enter your weapon’s attack speed as a whole number of game ticks. Common values are 4 ticks for weapons like the abyssal whip (2.4 seconds per attack) and 5 or 6 for slower weapons. One tick is always 0.6 seconds. 3. Accuracy (%): Enter your chance to hit as a percentage from 0 to 100. Accuracy calculators estimate this from your Attack bonus versus the monster’s Defence — enter the percentage, not a decimal. Press Calculate. The headline shows your DPS, and the breakdown walks through average hit, damage per attack, and attack interval. Change any input — a different weapon’s speed, a prayer-boosted max hit — and press Calculate again to compare setups side by side. Press Reset to start fresh.

The DPS Formula Explained

The formula the calculator uses is: DPS = (accuracy × max hit ÷ 2) ÷ (ticks × 0.6) It has three logical pieces. First, the average hit: because OSRS hit rolls are uniformly distributed from 0 up to your max hit, the long-run average of a successful hit is max hit ÷ 2. A max hit of 40 averages 20 per successful hit. Second, the expected damage per attack: multiply the average hit by your accuracy (as a decimal). With 75% accuracy and an average hit of 20, you deal 0.75 × 20 = 15 damage per attack on average — the misses are baked in. Third, the attack interval: multiply your weapon’s tick speed by 0.6 seconds per tick. A 4-tick weapon attacks every 2.4 seconds. Divide damage per attack by seconds per attack and you get damage per second: 15 ÷ 2.4 = 6.25 DPS. Each piece has an intuitive meaning, which is why DPS is such a good comparison tool. Raise your max hit and the numerator grows. Raise your accuracy and the numerator grows. Use a faster weapon and the denominator shrinks. Every upgrade path in the game maps to exactly one part of the formula.

Worked Example 1: Whip-Style Setup

Take a max hit of 40, an attack speed of 4 ticks, and 75% accuracy — a typical mid-level melee setup: Average hit: 40 ÷ 2 = 20. Damage per attack: 0.75 × 20 = 15. Three out of four attacks land, and the ones that land average 20, so each attack cycle averages 15 damage. Attack interval: 4 × 0.6 = 2.4 seconds per attack. DPS: 15 ÷ 2.4 = 6.25. So this setup deals 6.25 damage per second on average — 375 damage per minute, or 22,500 per hour if you attacked non-stop. Against a monster with 100 hitpoints, the average kill takes 100 ÷ 6.25 = 16 seconds, or about 7 attacks.

Worked Example 2: Slower but More Accurate

Now a max hit of 35, an attack speed of 5 ticks, and 80% accuracy — a slower weapon with better hit chance: Average hit: 35 ÷ 2 = 17.5. Damage per attack: 0.80 × 17.5 = 14. The max hit is lower than Example 1, but the higher accuracy nearly closes the gap: 14 versus 15 per attack. Attack interval: 5 × 0.6 = 3.0 seconds per attack. DPS: 14 ÷ 3 = 4.6667, which rounds to 4.67 DPS. This is the comparison the calculator is built for: Example 2’s weapon looks respectable on max hit (35 vs 40) and wins on accuracy, but the slower attack speed drags it to 4.67 DPS versus 6.25 — about 25% less damage output. Max hit alone would never have told you that.

Worked Example 3: High Max Hit, Slow Weapon

Finally, a max hit of 48, an attack speed of 6 ticks, and 65% accuracy — a heavy hitter against a high-defence target: Average hit: 48 ÷ 2 = 24. Damage per attack: 0.65 × 24 = 15.6. The big max hit is heavily discounted by the 35% miss rate. Attack interval: 6 × 0.6 = 3.6 seconds per attack. DPS: 15.6 ÷ 3.6 = 4.3333, which rounds to 4.33 DPS. Despite the impressive 48 max hit, this setup manages only 4.33 DPS — worse than both previous examples. The lesson: against high-defence monsters, accuracy and attack speed usually beat raw max hit, because a miss deals zero no matter how big the max is. This is why experienced players check DPS against the specific monster’s defence rather than trusting max hit alone.

Understanding Your Results

The headline DPS is your long-run average damage output per second of continuous attacking. Use it to compare weapons, gear setups, prayers, and potions against the same monster: higher DPS means faster kills, full stop. The breakdown rows tell you where the DPS comes from. Average hit reflects your Strength-side stats. Accuracy reflects your Attack bonus versus the target’s Defence. Attack interval reflects your weapon choice. If you want to raise DPS, find the weakest of the three: a setup with 95% accuracy but a low max hit wants Strength upgrades; a setup with a huge max hit but 50% accuracy wants accuracy upgrades or defence reduction. Two caveats keep the number honest. First, it is an average — any single kill can run hot or cold, and short fights are swingy. Second, it assumes you attack continuously; in real gameplay, eating, moving, and prayer flicking all cut into it. Think of DPS as the ceiling your execution approaches, not a promise.

Common DPS Mistakes to Avoid

The biggest mistake is comparing max hits instead of DPS. A 48 max hit at 6-tick speed and 65% accuracy (4.33 DPS) loses badly to a 40 max hit at 4-tick speed and 75% accuracy (6.25 DPS). Max hit is one ingredient; DPS is the finished dish. The second is forgetting accuracy. New players obsess over Strength bonuses and ignore Attack bonuses, then wonder why their big max hit underperforms. Against high-defence bosses, accuracy is frequently the highest-value stat in the formula — run the calculator with your real accuracy before buying an expensive Strength upgrade. The third is entering accuracy as a decimal. The calculator expects a percentage: 75, not 0.75. Entering 0.75 would be read as 0.75% accuracy and your DPS would collapse to nearly nothing. The fourth is using the wrong tick speed. Weapon attack speeds are fixed per weapon — check the actual value rather than guessing. One tick of error (0.6 seconds per attack) shifts DPS by roughly 15-25% on fast weapons. The fifth is ignoring the target. Accuracy depends on the monster’s Defence level and bonuses, so your DPS against a low-defence monster and a raid boss can differ enormously with identical gear. Always compute DPS against the specific thing you plan to kill. Finally, remember what DPS does not include: special attack damage, damage-over-time effects like poison or venom, and defence-reducing effects that raise your whole team’s accuracy. Those sit on top of the base DPS this calculator gives you.

Frequently Asked Questions

1. What is DPS in OSRS?

DPS stands for damage per second — the average amount of damage your setup deals each second of continuous attacking. It combines max hit, accuracy, and attack speed into one number so different weapons and gear can be compared fairly.

2. Why is average hit equal to max hit divided by 2?

OSRS hit rolls are uniformly distributed: every integer from 0 up to your max hit is equally likely on a successful hit. The average of 0 through 40 is 20, so over many hits you average exactly half your max.

3. How long is one game tick?

One tick is 0.6 seconds, and the game runs at 100 ticks per minute. A 4-tick weapon like the abyssal whip attacks every 2.4 seconds; a 6-tick weapon attacks every 3.6 seconds.

4. Where do I find my accuracy percentage?

Use an OSRS accuracy calculator or DPS spreadsheet: enter your Attack level, Attack bonus, prayers, and potions, plus the monster’s Defence level and bonuses. The output is your hit chance — enter it here as a percentage.

5. Should I enter accuracy as 75 or 0.75?

Enter 75. The calculator expects a percentage between 0 and 100. Entering 0.75 would be interpreted as less than one percent accuracy and give a near-zero DPS.

6. Why does a higher max hit sometimes give lower DPS?

Because DPS also depends on attack speed and accuracy. A slow, inaccurate weapon with a big max hit can easily lose to a fast, accurate weapon with a smaller max hit — as Worked Example 3 shows, 48 max hit can mean just 4.33 DPS.

7. Does this calculator include special attacks?

No. It computes sustained DPS from regular attacks only. Special attacks add burst damage on top — evaluate them separately and add their average contribution if you want a complete picture.

8. Does prayer or potion-boosted max hit change the result?

Yes — enter your boosted max hit, not your base one. Anything that raises your max hit, accuracy, or attack speed (like certain potions or prayers) should be reflected in the inputs for an honest comparison.

9. What attack speed do I enter for my weapon?

Your weapon’s attack speed in ticks, as a whole number — for example, 4 for an abyssal whip or blowpipe, 5 for many swords, 6 or 7 for slower weapons. Check the weapon’s stats rather than guessing.

10. Is 100% accuracy possible?

Against very low-defence targets, effectively yes, and you can enter 100. Against most meaningful content your accuracy will be lower — which is exactly why the accuracy input matters so much to the result.

11. How do I use DPS to choose between two weapons?

Compute DPS for both setups against the same monster, keeping max hit, speed, and accuracy specific to each setup. The higher DPS kills faster. If the numbers are close, consider cost, special attacks, and convenience.

12. Does DPS account for missing?

Yes — that is the accuracy term. Multiplying average hit by your hit chance bakes misses directly into the damage-per-attack figure, so a 50%-accuracy setup shows half the damage per attack of an otherwise identical 100%-accuracy setup.

13. Why do my real kills differ from the DPS estimate?

RNG variance, for one — averages need many hits to assert themselves. Also movement, eating, and prayer management reduce your actual attacks per minute below the theoretical maximum the calculator assumes.

14. Can I compare magic and ranged setups too?

Yes. The formula is style-agnostic: enter the max hit, attack speed in ticks, and accuracy of any combat style and the DPS comparison is apples to apples, as long as each setup’s inputs are correct.

15. What is a good DPS for mid-level PvM?

It depends entirely on the target’s defence, but roughly: 4–6 DPS is respectable for mid-level slayer and quest bosses, while high-level raid and boss setups push well past 8–10 DPS with optimized gear, prayers, and specials. Compare against your current setup, not an absolute bar.

Final Thoughts

DPS is the great equalizer of Old School RuneScape combat: it cuts through max-hit bragging and weapon hype to answer the only question that matters — how fast does this setup actually kill? The Osrs Dps Calculator gives you that number from three honest inputs, and its breakdown shows you exactly which of the three — max hit, accuracy, or attack speed — is holding you back. Run your current setup, run the upgrade you are considering, and let the DPS decide. Your kill times, your supply costs, and your sanity will all thank you.