Skip to content
Finance

Home Insurance Coverage Calculator

Home Insurance Coverage Calculator

See the recommended coverage amounts for your home.

$

Recommended Coverage Levels

Coverage A — Dwelling (100%)Rebuilds the main house itself–
Coverage B — Other structures (10%)Detached garage, shed, fences–
Coverage C — Personal property (50%)Furniture, clothes, electronics–
Coverage D — Loss of use (20%)Hotel and living costs if displaced–
Total recommended coverage–

These are the industry-standard percentages used by most insurers. This is a coverage guide only — it does not estimate your premium.

Most homeowners buy home insurance once and never think about it again — until a fire, storm, or burst pipe forces them to ask the hardest question: is my coverage actually enough to rebuild my life? The answer lives in four coverage levels, labeled A through D, that every standard policy uses. Our free Home Insurance Coverage Calculator turns your home's rebuild value into the recommended amount for each level, giving you a clear benchmark to compare against your current policy in under a minute.

What This Calculator Does

The calculator starts from a single number — what it would cost to rebuild your home from scratch at today's construction prices — and applies the industry-standard percentages that insurers themselves use as defaults. Coverage A (dwelling) is set to 100 percent of the rebuild value, because it must pay to reconstruct the house itself. Coverage B (other structures) is set to 10 percent, covering things like a detached garage, shed, or fence. Coverage C (personal property) is set to 50 percent, covering your belongings inside the home. Coverage D (loss of use) is set to 20 percent, covering hotel bills and extra living costs while your home is being repaired.

The result is a plain-English breakdown of the coverage levels most insurers recommend as a starting point, plus the total across all four. This is a coverage guide, not a quote: it tells you how much protection to carry, not what the premium will cost. Premiums depend on many other factors — your location, claims history, deductible, and discounts — which is why this tool deliberately does not estimate them.

How to Use the Home Insurance Coverage Calculator

Enter your home's rebuild value in dollars — the cost to reconstruct the same house on the same lot, not what you paid for it and not its current market price. If you had a recent appraisal, builder's estimate, or replacement-cost figure from your insurer, use that. Otherwise, a rough starting point is your home's square footage multiplied by the local construction cost per square foot, which real estate sites and local builders can provide.

Press Calculate and the result box shows your recommended amounts for Coverage A, B, C, and D, each with a one-line explanation of what it protects, plus the total recommended coverage. Compare these numbers with the declarations page of your current policy — that is the summary page your insurer sends each year. If your policy's numbers are well below the calculator's, it may be time to talk to your agent. Press Reset to clear the form and try a different rebuild value.

Understanding Coverage A, B, C and D

Coverage A — Dwelling is the foundation of the policy. It pays to repair or rebuild the physical structure of your home: walls, roof, floors, built-in appliances, and attached structures like a garage that shares a wall. It is set to 100 percent of the rebuild value because a total loss should leave you able to reconstruct the same home. Underinsuring Coverage A is the single most expensive mistake a homeowner can make, since every other coverage level is often tied to it.

Coverage B — Other Structures protects buildings on your property that are not attached to the house: a detached garage, a storage shed, a fence, a gazebo, or a guest cottage. The standard recommendation is 10 percent of Coverage A. Most homes need far less than this, but the cushion matters if you have a large detached garage or an outbuilding with real value. Business structures and rented-out buildings are usually excluded and need separate policies.

Coverage C — Personal Property covers your belongings: furniture, clothing, electronics, kitchenware, and everything else you own inside the home. The standard recommendation is 50 percent of Coverage A. Many people are shocked when they add up the replacement cost of everything they own — walk through your home room by room with a notepad and you will see why insurers default to such a large figure. Note that expensive items like jewelry, art, and collectibles often have sub-limits and may need scheduled extra coverage.

Coverage D — Loss of Use (also called additional living expenses) pays the extra costs of living elsewhere while your home is uninhabitable after a covered loss: hotel bills, restaurant meals above your normal grocery spending, laundry, and even pet boarding. The standard recommendation is 20 percent of Coverage A. Rebuilding after a major fire can take a year or more, and temporary housing costs add up fast, so this coverage protects your budget during the most stressful months.

Worked Examples With Full Arithmetic

Here are two complete examples showing exactly how each coverage amount is derived.

Example 1 — A $250,000 rebuild value. Coverage A = 100% × $250,000 = $250,000. Coverage B = 10% × $250,000 = $25,000. Coverage C = 50% × $250,000 = $125,000. Coverage D = 20% × $250,000 = $50,000. Total recommended coverage = $250,000 + $25,000 + $125,000 + $50,000 = $450,000. That total equals 180 percent of the rebuild value, which surprises many homeowners — but it reflects the real cost of replacing the structure, the outbuildings, everything inside, and a year of temporary housing all at once.

Example 2 — A $420,000 rebuild value. Coverage A = 100% × $420,000 = $420,000. Coverage B = 10% × $420,000 = $42,000. Coverage C = 50% × $420,000 = $210,000. Coverage D = 20% × $420,000 = $84,000. Total = $420,000 + $42,000 + $210,000 + $84,000 = $756,000. A homeowner with this rebuild value who carries only $300,000 of dwelling coverage would be underinsured by $120,000 on Coverage A alone — and because B, C, and D are often calculated as percentages of A, the shortfall would cascade across the entire policy.

How to Interpret Your Results

Treat the calculator's numbers as a benchmark, not a verdict. Pull out your policy's declarations page and compare line by line. If your Coverage A matches or exceeds the recommendation, you are in good shape on the most important line. If it falls short, ask your agent about raising it — and ask whether your B, C, and D limits will rise automatically, since many policies set them as percentages of A and adjust on their own.

Pay special attention to Coverage C if you own a lot of valuables. The 50 percent guideline assumes an average household; if you have a home office full of equipment, a large wardrobe, or expensive hobbies, consider a home inventory to see whether 50 percent truly covers you. And remember that Coverage C usually pays actual cash value (depreciated) unless you buy replacement-cost coverage — a five-year-old television is not worth its original price in the insurer's eyes.

Finally, look at the total with fresh eyes. It will likely be much larger than your home's market price, and that is normal: market price includes land value, which insurance does not need to replace, while the coverage total must replace the building, its contents, and your living expenses simultaneously. A big total is not a sign the calculator is wrong — it is a sign of how much a total loss really costs.

Getting Your Rebuild Value Right

Every number in this calculator flows from the rebuild value you enter, so it deserves care. Rebuild value is not market value: a $500,000 market price in an expensive neighborhood might reflect a $300,000 structure on $200,000 of land, and insurance only rebuilds the structure. Conversely, in areas with modest home prices, construction costs can exceed market value — a real risk of underinsurance if you use the sale price as your guide.

The best sources for rebuild value are a professional replacement-cost appraisal, your builder's per-square-foot estimate for new construction, or the replacement-cost estimator your insurer used when writing the policy — you can ask your agent for that figure. As a rough check, multiply your home's finished square footage by local construction costs per square foot (often $150 to $300 in the US, varying widely by region and finishes). Update the figure every few years, because construction costs rise with inflation and labor markets.

If you have made major improvements — a finished basement, a new kitchen, an addition — your rebuild value has gone up and your Coverage A may now be too low. Tell your insurer about significant renovations; many policies require it, and failing to report an addition can complicate a claim. A quick run through this calculator after any big project keeps your coverage aligned with reality.

Common Mistakes to Avoid

The most common mistake is insuring for market value or purchase price instead of rebuild cost. In a hot market this leaves you overinsured (paying for coverage you cannot collect, since the insurer pays rebuild cost), and in a soft market it leaves you underinsured. Always anchor Coverage A to what reconstruction would actually cost today.

Another frequent error is setting Coverage A once and forgetting it for a decade. Construction costs have risen sharply in recent years, and a limit that was adequate five years ago may now fall 20 or 30 percent short. Ask your agent about inflation guard endorsements, which automatically nudge your dwelling limit upward each renewal to track construction costs.

Homeowners also routinely underestimate their belongings. Coverage C at 50 percent of A sounds generous until you inventory every room — most families who actually list their possessions find the total sobering. Do a room-by-room inventory with photos or video stored safely off-site or in the cloud; it both validates your Coverage C and makes any future claim dramatically easier. And do not assume standard policies cover floods or earthquakes — those almost always require separate policies regardless of your A-through-D limits.

Frequently Asked Questions

1. What does Coverage A mean in home insurance?

Coverage A, or dwelling coverage, pays to repair or rebuild the physical structure of your home after a covered loss — the walls, roof, floors, and attached structures. It is the core of every homeowners policy and is typically set to 100 percent of the home's rebuild value. All the other coverage levels are commonly calculated as percentages of Coverage A.

2. What does Coverage B cover?

Coverage B protects structures on your property that are not attached to the house, such as a detached garage, storage shed, fence, or gazebo. The industry-standard recommendation is 10 percent of your Coverage A dwelling limit. If you have valuable outbuildings, make sure 10 percent is genuinely enough — a large detached garage with a workshop inside can exceed the default.

3. What does Coverage C cover?

Coverage C, or personal property coverage, pays to replace your belongings — furniture, clothing, electronics, appliances, and everything else you own. The standard recommendation is 50 percent of Coverage A. Expensive categories like jewelry, fine art, and collectibles often have lower sub-limits within Coverage C and may need additional scheduled coverage to be fully protected.

4. What does Coverage D cover?

Coverage D, or loss of use coverage, pays your extra living expenses while your home is uninhabitable after a covered loss — hotel stays, restaurant meals beyond your normal food budget, laundry, and pet boarding. The standard recommendation is 20 percent of Coverage A. Since major repairs can take many months, this coverage keeps a disaster from wrecking your finances on top of your home.

5. How is rebuild value different from market value?

Market value is what a buyer would pay for your home, including the land it sits on. Rebuild value is what a contractor would charge to reconstruct the same building from scratch, excluding land. Insurance only replaces the building, so Coverage A should track rebuild value. Using market value can leave you overinsured in expensive neighborhoods or dangerously underinsured where construction costs exceed sale prices.

6. How do I find my home's rebuild value?

The most reliable sources are a professional replacement-cost appraisal, a builder's new-construction estimate for a similar home, or the replacement-cost figure your insurer calculated when writing your policy — your agent can share it. As a rough check, multiply your finished square footage by local construction costs per square foot. Revisit the number every few years and after any major renovation.

7. What happens if my Coverage A is too low?

If a total loss costs more to rebuild than your Coverage A limit, you pay the difference out of pocket — the insurer will not exceed the limit. Worse, many policies include a coinsurance clause: if you insure for less than a required percentage of rebuild value (often 80 percent), even partial claims get reduced proportionally. Being underinsured by 20 percent could mean a $50,000 kitchen fire claim pays only $40,000.

8. Should I raise Coverage B, C, or D individually?

Often you do not need to, because many policies set B, C, and D as automatic percentages of Coverage A — raising A raises them too. Check your declarations page to see whether yours work this way. Raise an individual limit when your situation is unusual: a big detached workshop (B), a home full of expensive equipment (C), or living in an area where repairs take especially long (D).

9. Does this calculator tell me my insurance premium?

No. This calculator recommends how much coverage to carry, not what it will cost. Premiums depend on your location, the home's age and construction, your claims history, deductible, discounts, and the insurer's rates. Use the coverage amounts here as the input when you request quotes, so every insurer prices the same level of protection and you can compare fairly.

10. What is replacement cost versus actual cash value?

Replacement cost pays what it takes to buy a new equivalent item today; actual cash value pays the depreciated value — what the item was worth just before the loss. A five-year-old sofa might cost $1,200 to replace but be worth only $400 at actual cash value. Replacement-cost coverage costs more but pays far better at claim time, and it is the version behind this calculator's recommendations.

11. Are floods and earthquakes covered by standard limits?

Generally no. Standard homeowners policies exclude flood and earth movement, regardless of how high your Coverage A through D limits are. Flood insurance comes through the National Flood Insurance Program or private insurers, and earthquake coverage is usually a separate endorsement or policy. If you live in a flood zone or seismic area, address these gaps directly — raising your standard limits will not fill them.

12. How often should I review my coverage amounts?

Review them at every renewal, and immediately after major renovations, large purchases, or a move. Construction costs and the value of your belongings both drift upward over time, so a limit set five years ago may be 20 percent or more out of date. A two-minute run through this calculator each year, compared against your declarations page, is the simplest habit that keeps you properly protected.

13. What is an inflation guard endorsement?

An inflation guard automatically increases your Coverage A dwelling limit at each renewal to keep pace with rising construction costs. It is a cheap endorsement that prevents the slow drift into underinsurance that happens when limits sit unchanged for years. Ask your agent whether your policy includes one — and still verify the limit against a fresh rebuild estimate every few years.

14. Do I need a home inventory, and how do I make one?

Yes — an inventory validates your Coverage C and makes claims far smoother. Walk through your home room by room, photographing or videoing everything and noting big-ticket items with approximate replacement costs. Store the file in the cloud or somewhere off-site so a fire cannot destroy it along with the belongings. Update it yearly and after major purchases; there are also free apps designed exactly for this.

15. Will raising my coverage raise my premium a lot?

Usually less than people fear. The jump from an inadequate Coverage A to the proper rebuild value often adds a modest amount to the annual premium — far less than the tens of thousands you would pay out of pocket after an underinsured loss. Get a quote for the corrected limits before deciding; in many cases the extra protection costs less per year than a single month of the temporary housing it would otherwise fail to cover.

Final Thoughts

Home insurance only works if the numbers on your policy reflect the real cost of rebuilding your home and your life. With the Home Insurance Coverage Calculator, you can check the four coverage levels that matter — A, B, C, and D — against the industry-standard benchmarks in less time than it takes to drink a cup of coffee. Compare the results with your declarations page, keep your rebuild value current, and talk to your agent about any gaps. A few minutes of attention today is what turns a policy from a piece of paper into genuine protection.