FedEx Freight Class Calculator
Freight class comes from density: the heavier a shipment is for its size, the lower its class. Enter the pallet or box details and we will do the lookup.
Shipment density
NMFC freight class
Volume used
Density = weight (lb) ÷ volume (ft³), where volume (ft³) = L × W × H ÷ 1728. Classes run from 50 (densest, cheapest) to 500 (least dense, priciest).
Shipping a pallet across the country can cost a few hundred dollars or a few thousand, and the difference often comes down to one number: the freight class. Get it wrong on the bill of lading and you may face reclassification fees or an unpleasant surprise invoice.
The Fedex Freight Class Calculator takes the guesswork out. Enter your shipment's weight and its length, width, and height in inches, and it computes the density and returns the correct NMFC freight class in seconds.
In this guide you will learn what freight class actually is, how density decides it, how to measure a shipment properly, and how to avoid the mistakes that cost shippers real money.
What Freight Class Actually Is
Freight class is a standardized rating from 50 to 500 used for less-than-truckload shipping. It tells the carrier how difficult your freight is to handle relative to its weight.
The National Motor Freight Classification system defines 18 classes. Lower numbers mean dense, easy freight that is cheap to move; higher numbers mean bulky, awkward freight that costs more.
FedEx Freight uses these classes to price LTL shipments, so knowing your class before you book lets you compare quotes accurately and fill out paperwork correctly.
Why Density Decides Everything
Density measures how much weight is packed into each cubic foot. A pallet of books is dense; a pallet of pillows is not, even if both weigh the same on a scale.
Carriers love dense freight because it uses little trailer space per pound of revenue. Bulky freight eats up space they could have sold to someone else, so it gets a higher class and a higher price.
That is why two shipments of identical weight can sit in completely different classes. The one that fills more cubic feet pays more.
The Density Formula, Step by Step
First find the volume in cubic inches by multiplying length, width, and height.
Volume (in³) = length × width × height
Convert cubic inches to cubic feet by dividing by 1728, since a cubic foot holds 12 × 12 × 12 inches.
Volume (ft³) = volume (in³) ÷ 1728
Finally, divide the shipment weight in pounds by the volume in cubic feet.
Density (lb/ft³) = weight (lb) ÷ volume (ft³)
The 18 Freight Classes at a Glance
Each class covers a density range. Above 50 pounds per cubic foot earns class 50, the cheapest. Between 35 and 50 is class 55, then 30 to 35 is class 60.
The middle bands most shippers see are classes 65 through 125, covering roughly 7 to 30 pounds per cubic foot. Everyday palletized goods often land here.
Below 2 pounds per cubic foot you reach classes 300 and 400, and anything under 1 pound per cubic foot is class 500, the most expensive rating in the system.
How to Measure a Shipment Correctly
Measure the full handling unit, not just the product. For a palletized shipment, that means the pallet plus the stacked freight, including any overhang.
Take the longest points for each dimension. If boxes overhang the pallet edge by two inches, those inches count toward the length or width.
Round each dimension up to the next whole inch. Carriers round up too, so matching their method keeps your declared class consistent with theirs.
Worked Example: A Dense Pallet of Books
A publisher ships books on a pallet measuring 48 × 40 × 36 inches, weighing 900 pounds total.
Volume = 48 × 40 × 36, which equals 69,120 cubic inches. Divide by 1728 to get 40 cubic feet.
Density = 900 ÷ 40, which equals 22.5 pounds per cubic foot.
A density of 22.5 lands exactly on a boundary, and boundary densities take the lower class, so this maps to class 65. Dense and cheap to move, exactly what carriers like.
Worked Example: A Bulky Pallet of Pillows
A bedding company ships pillows on a pallet measuring 48 × 40 × 60 inches, weighing 240 pounds.
Volume = 48 × 40 × 60, which equals 115,200 cubic inches. Divide by 1728 to get 66.67 cubic feet.
Density = 240 ÷ 66.67, which equals 3.6 pounds per cubic foot.
A density of 3.6 falls in the 3 to 4 band, which maps to class 250. Same pallet footprint as the books, but far less dense and far pricier per pound.
Worked Example: A Mid-Range Machinery Part
A supplier ships a crated machine part measuring 36 × 30 × 24 inches, weighing 420 pounds including the crate.
Volume = 36 × 30 × 24, which equals 25,920 cubic inches. Divide by 1728 to get 15 cubic feet.
Density = 420 ÷ 15, which equals 28 pounds per cubic foot.
A density of 28 falls in the 22.5 to 30 band, which maps to class 65. Note the crate weight counts, so weighing the packed unit matters.
Worked Example: Lightweight Trade Show Displays
An exhibitor ships display panels in a crate measuring 60 × 24 × 24 inches, weighing 85 pounds.
Volume = 60 × 24 × 24, which equals 34,560 cubic inches. Divide by 1728 to get 20 cubic feet.
Density = 85 ÷ 20, which equals 4.25 pounds per cubic foot.
A density of 4.25 falls in the 4 to 5 band, which maps to class 200. Light, bulky freight like this is exactly what the higher classes were made for.
What Happens at the Class Boundaries
Density rarely lands exactly on a boundary, but when it does, the rule is simple: the higher density band wins the lower class. A shipment at exactly 15 pounds per cubic foot is class 70, not 77.5.
The calculator applies this automatically by checking each threshold from the top down and assigning the first class whose band the density exceeds.
If your density sits right on a line, double-check your measurements. A single extra inch of height can tip a shipment into a cheaper or pricier class.
Packing Tighter to Lower Your Class
Because class follows density, reducing empty space is the most direct way to cut freight costs. Tighter packing raises density without changing the product.
Switching to a smaller pallet, stacking boxes more efficiently, or removing oversized filler can move a shipment down a full class or more.
Run the numbers both ways in the calculator before you repack. If trimming six inches of height drops you from class 150 to class 125, the savings are worth the effort.
Common Mistakes That Trigger Reclassification
The costliest mistake is measuring the product instead of the handling unit. Carriers measure the pallet as tendered, overhang and all.
Guessing the weight is another classic. An underestimated weight lowers your declared density and your class, and the carrier's scale will catch it.
Forgetting stackability, liability, and handling notes does not change the class math, but it can still affect the final rate, so complete the paperwork fully.
Freight Class Versus Other Shipping Factors
Class is the biggest rating factor, but not the only one. Distance, fuel surcharges, and accessorials like liftgate service all shape the final bill.
Two shippers with the same class can pay different rates because of negotiated discounts or lane-specific pricing.
Still, class is the factor you control most directly through packaging. Nail it, and every other part of the quote becomes easier to compare.
When to Recheck Your Class
Recalculate whenever the product, packaging, or pallet pattern changes. A new box size shifts the volume and can quietly move your class.
Seasonal packaging changes count too. Extra protective wrap for winter shipping adds volume without adding weight, which lowers density.
Make the calculator part of your quoting routine. Thirty seconds of math beats a reclassification fee every time.
How FedEx Freight Quotes Use Your Class
When you request an LTL quote, the carrier combines your freight class with the origin and destination to build a base rate. Class sets the price per hundred pounds, known in the industry as the CWT rate.
Lower classes get lower CWT rates because the freight is efficient to haul. A class 70 shipment and a class 200 shipment traveling the same lane can have dramatically different base rates before any discount.
Your negotiated discount then applies on top of that base. Big shippers earn deeper discounts, but the class underneath still drives the starting point, which is why accurate classification matters at every volume.
Fuel surcharges, which change weekly, and accessorial fees for services like liftgate delivery or appointment scheduling are added last. They do not depend on class, so getting the class right isolates the one variable you fully control.
Density-Based Versus Fixed Commodity Classes
Most freight is density-rated, which is what this calculator handles. Some commodities, however, carry fixed NMFC classes regardless of density, because of special handling, liability, or stowability concerns.
Examples include certain machinery, trade show exhibits with declared value, and hazardous materials. Their item numbers in the NMFC book state a class outright, and density math does not apply.
If your product has an NMFC item number from the manufacturer or a freight forwarder, check whether it specifies a fixed class before relying on density. When no fixed class exists, density rules, and the calculator's answer stands.
When in doubt, confirm with your carrier's classification team. A two-minute question beats a reclassification dispute after the freight has already moved.
Frequently Asked Questions
1. What does the Fedex Freight Class Calculator do?
It computes your shipment's density from its weight and dimensions, then looks up the matching NMFC freight class from 50 to 500. You get the class, the density, and the volume in one result.
2. What is NMFC freight class?
NMFC stands for National Motor Freight Classification. It is the industry standard that groups LTL freight into 18 classes based on density, handling, stowability, and liability, with density doing most of the work.
3. Why does FedEx care about freight class?
Class is a core input to LTL pricing. Denser freight uses less trailer space per pound, so carriers charge less for it. Declaring the right class keeps your quotes accurate and avoids reclassification fees.
4. What density gives class 70?
Densities from 15 up to 22.5 pounds per cubic foot map to class 70. It is one of the most common classes for palletized goods like canned foods, books, and bottled products.
5. What is the cheapest freight class?
Class 50 is the cheapest. It applies to anything denser than 50 pounds per cubic foot, such as metal parts, bricks, or other heavy compact freight.
6. What is the most expensive freight class?
Class 500 is the priciest. It covers freight under 1 pound per cubic foot, like uncompressed foam, ping pong balls, or very bulky lightweight displays.
7. Do I include the pallet in the weight and dimensions?
Yes. Carriers measure and weigh the handling unit as tendered, pallet included. Measuring only the product understates volume or weight and produces a wrong class.
8. What happens if I declare the wrong class?
The carrier can reclassify the shipment after inspection and bill you the difference, often with an added reclassification fee. Repeated errors can also slow down your future shipments.
9. Can two shipments with the same weight have different classes?
Absolutely. Class follows density, not weight. A 500-pound pallet of books might be class 70 while a 500-pound pallet of pillows could be class 250, because the pillows fill far more cubic feet.
10. Does the calculator work for carriers other than FedEx?
Yes. The NMFC class system is used across the LTL industry, so the class it returns applies to other carriers too. Final rates still differ by carrier, lane, and discounts.
11. How do I lower my freight class?
Pack tighter to raise density. Smaller pallets, better stacking, and less empty filler shrink the volume without changing the weight, which can drop you into a cheaper class.
12. What units does the calculator use?
Inches for length, width, and height, and pounds for weight. Those are the standard US freight units, and the 1728 divisor converts cubic inches to cubic feet.
13. What if my shipment is not a rectangle?
Use the bounding box: the longest, widest, and tallest points of the packed unit. Carriers charge for the space your freight occupies in the trailer, including irregular gaps.
14. Is freight class the same as shipping zone?
No. Class describes the freight itself, while zones describe distance between origin and destination. Both affect the rate, but class is about your shipment and zone is about the trip.
15. How accurate is this calculator?
The math follows the official NMFC density bands exactly, so the class is accurate for density-rated freight. Special commodities with fixed classes and unusual handling needs should still be confirmed with the carrier.