Skip to content
Construction

Exterior Paint Calculator

Exterior Paint Calculator

Add every wall or section, subtract doors and windows, pick the surface type and coats — get exact gallons and total cost.

SectionLength (ft)Height (ft)
1
2
+ Add section − Remove section

Running out of paint halfway up a ladder is one of the most avoidable miseries in home improvement. Exterior jobs are especially unforgiving: the surfaces are large, the paint is expensive, and a mid-project store run means a visible color difference where the new batch meets the old. The Exterior Paint Calculator above prevents all of that — enter every wall or section, subtract the doors and windows, pick your surface type and number of coats, and it tells you exactly how many gallons to buy and what they will cost.

The key insight most estimators miss is that coverage is not one number. A gallon stretches about 400 square feet on smooth wood siding but only about 200 on thirsty brick or masonry, and that single difference can double your paint bill. This calculator carries a coverage rate for each common exterior surface, so the gallon count reflects what your walls actually drink, not a generic label average.

What This Calculator Does

The Exterior Paint Calculator takes a table of wall or section measurements — length and height in feet for each — plus the total area of doors, windows, and trim to exclude, the exterior surface type, the number of coats, and the price per gallon. From those it computes the gross wall area, the net paintable area, the exact gallons required (always rounded up to whole gallons), and the total paint cost.

The results panel leads with the headline — gallons and total cost — then a one-line summary of net area, surface type, coats, and price, followed by a numbered breakdown of every arithmetic step. The section table grows and shrinks with the “+ Add section” and “− Remove section” controls, so anything from a garden shed to a full house fits.

How to Use the Calculator

Measure each paintable wall or section and enter its length and height in feet — include gables as separate sections, splitting them into rectangles and triangles if needed. Use “+ Add section” for every surface and “− Remove section” to drop the last one. Then estimate the total area of everything you will not paint — doors, windows, and wide trim — and enter it as the openings figure; a standard door is about 21 sq ft and a typical window about 12–15 sq ft.

Choose your surface type, because its coverage rate drives the whole estimate. Keep the default of 2 coats — one coat rarely covers evenly on exteriors, especially over bare or weathered surfaces. Enter the price per gallon and press Calculate. If anything is missing or impossible, an error message points at the exact problem. Press Reset to start a fresh estimate.

The Math Behind the Estimate

The calculation runs in four steps. First, each section’s area: length × height in feet, summed for the gross wall area. Second, the net paintable area: gross minus the openings area. Third, the paint quantity: net area × coats ÷ coverage per gallon, rounded up to the next whole gallon — stores do not sell fractions of a gallon, and running short mid-wall is the outcome this tool exists to prevent. Fourth, the cost: gallons × price per gallon.

The coverage rates are the heart of the estimate. Smooth surfaces like wood siding and fiber cement take about 350–400 sq ft per gallon; textured stucco drops to about 250; porous brick and masonry drink paint at roughly 200 sq ft per gallon. Primer, which soaks into bare surfaces, is rated at 300. Choosing the wrong surface type is the fastest way to a wrong answer, so match it to your actual walls.

Worked Example: Two Walls of Siding

Say you are painting two siding walls: one 20 × 10 ft and one 15 × 10 ft. The areas are 200 and 150 sq ft, for a gross of 350 sq ft. The walls hold two doors and two windows totaling 40 sq ft of openings, so the net paintable area is 350 − 40 = 310 sq ft. The surface is vinyl siding at 350 sq ft per gallon, you want 2 coats, and the paint costs $45 per gallon.

Paint = 310 × 2 ÷ 350 = 620 ÷ 350 = 1.77 gallons, rounded up to 2 gallons. Cost = 2 × $45 = $90.00. Notice the rounding: 1.77 gallons becomes 2, and that spare quarter-gallon is not waste — it is your touch-up supply for the inevitable scuffs and nail pops.

Worked Example: Full Stucco House

Now a full stucco house: four walls of 40 × 10, 30 × 10, 40 × 10, and 30 × 10 ft. Areas: 400, 300, 400, and 300 sq ft, grossing 1,400 sq ft. Doors, windows, and trim total 180 sq ft, so the net area is 1,400 − 180 = 1,220 sq ft. Stucco covers 250 sq ft per gallon, with 2 coats at $52 per gallon.

Paint = 1,220 × 2 ÷ 250 = 2,440 ÷ 250 = 9.76 gallons, rounded up to 10 gallons. Cost = 10 × $52 = $520.00. Compare this with smooth siding: the same 1,220 sq ft on wood siding at 400 sq ft per gallon would need only 7 gallons. Stucco’s texture costs you three extra gallons — about $156 — which is exactly why the surface type is a required input.

Worked Example: Small Shed, One Coat

A small shed: four walls of 8 × 8 ft, totaling 256 sq ft, with one door of 21 sq ft to exclude. Net area = 256 − 21 = 235 sq ft. The shed is wood siding at 400 sq ft per gallon, you choose 1 coat since the existing paint is in decent shape, and the paint costs $38 per gallon.

Paint = 235 × 1 ÷ 400 = 0.59 gallons, rounded up to 1 gallon. Cost = 1 × $38 = $38.00. One coat is the exception that proves the rule: it works here because the shed is small and the old paint is sound, but on weathered or bare exteriors a single coat shows through within a season. The calculator handles both — the coat count is yours to choose.

Understanding Your Results

The headline gives you the shopping list: whole gallons and the total price. The summary line beneath states the net paintable area, surface type, coats, and per-gallon price, so you can sanity-check the inputs at a glance — if the net area looks wrong, remeasure before you buy. The numbered steps rebuild the arithmetic in order, which makes it easy to see whether the gallon count is driven by area, coats, or a thirsty surface.

Treat the rounded-up gallon as exact, not generous. Paint left in the can is touch-up insurance: exterior paint fades in the sun, and a gallon bought two years later will not match the original batch. The closing tip about buying one batch and keeping a sealed gallon exists because mismatched touch-ups are visible from the street.

Common Mistakes to Avoid

The most expensive mistake is using the generic “350 sq ft per gallon” label figure for every surface. On brick at 200 sq ft per gallon, that shortcut under-buys by nearly half — you will be back at the store with a half-painted wall. The second classic error is forgetting the second coat in the estimate: one coat on a weathered exterior looks finished from the ladder and patchy from the sidewalk a month later.

People also forget to subtract openings on walls full of windows — a sunroom wall can be more glass than siding. And do not forget the gables: the triangular tops of walls are easy to leave out of the section table, and a two-story gable can add hundreds of square feet. Finally, never mix batches of the same color mid-wall; buy all gallons at once so the tint is identical across every can.

Frequently Asked Questions

1. How many square feet does a gallon of exterior paint cover?

It depends on the surface: roughly 400 on smooth wood siding, 350 on vinyl siding and fiber cement, 250 on stucco, 200 on brick and masonry, and about 300 for primer. The calculator applies the rate for your surface type.

2. How many gallons do I need to paint a house exterior?

A typical 1,500 sq ft home has roughly 1,200–1,600 sq ft of paintable wall, needing 7–16 gallons depending on surface and coats. Enter your actual measurements above for an exact figure.

3. Do I really need two coats on exterior walls?

Almost always. The first coat seals and the second builds even color and full weather protection. One coat is only sensible over sound existing paint in a similar color, as in the shed example above.

4. Should I subtract windows and doors from the area?

Yes — a standard door removes about 21 sq ft and a window 12–15 sq ft. On walls with many openings this meaningfully reduces the paint needed, so total them up and enter the figure.

5. How do I measure a gable end?

Split it into a rectangle (the wall below the roofline) plus a triangle (peak area = base × height ÷ 2). Enter each as its own section in the table.

6. Why does stucco need more paint than siding?

Texture and porosity. Stucco’s rough surface has far more real surface area than its flat measurements suggest, and it absorbs paint — about 250 sq ft per gallon versus 350–400 for smooth siding.

7. Can I use interior paint outside?

No. Interior paint lacks the UV blockers, mildew resistance, and flexible resins exterior paint needs. It will fade, crack, and peel within a season or two outdoors.

8. How much does it cost to paint a house exterior?

DIY paint and supplies for an average home often run $500–$1,500; professional jobs typically cost $3,000–$7,000+. Your paint cost from the calculator is the material baseline — labor multiplies it.

9. What is the openings figure for a typical wall?

Count about 21 sq ft per door and 12–15 sq ft per window. A wall with one door and two windows excludes roughly 45–50 sq ft. When in doubt, slightly overestimate — it is safer than under-buying paint.

10. Should I include the trim and soffits?

Only if you are painting them the same color with the same paint. Trim is usually a different finish (often semi-gloss) and is estimated separately — measure its linear feet instead of wall area.

11. Why round up to whole gallons?

Stores sell whole gallons, and the round-up is your touch-up reserve. A 1.77-gallon need becomes 2 gallons; that extra quart-plus covers scuffs, nail pops, and small repairs for years.

12. Does primer change the calculation?

Yes — primer covers about 300 sq ft per gallon and is a separate purchase. Run the calculator once with the primer surface type for the primer quantity, then again with your topcoat surface for the finish paint.

13. What weather is best for exterior painting?

Dry days between about 50°F and 85°F (10–29°C), out of direct harsh sun. Paint applied in extreme heat skins over too fast; in cold or damp air it may not cure properly.

14. How long does exterior paint last?

Typically 5–10 years depending on surface, climate, paint quality, and prep. South- and west-facing walls fade fastest. Two coats over proper prep lands at the long end of that range.

15. Does the calculator save my estimate?

No. Everything runs in your browser and nothing is stored or sent anywhere. Pressing Reset reloads the page and clears all fields.

Final Thoughts

The Exterior Paint Calculator turns a tape measure into a complete paint plan: gross and net area, the right coverage rate for your surface, whole gallons with the second coat included, and the total cost — with every step shown. Measure every section including the gables, subtract the openings honestly, and buy all your gallons in one batch. Do that, and the only trip you make mid-project will be up the ladder, not back to the store.