Skip to content
Math & Scientific

Chi Square Confidence Interval Calculator

Chi Square Confidence Interval Calculator

Estimate the true population variance from your sample data.

confidence interval for the population variance
Lower bound
Upper bound
Degrees of freedom (n − 1)
Chi-square critical values
Calculation

Critical values come from a built-in approximation table of the chi-square distribution (rounded to 3 decimals) covering common degrees of freedom.

Your sample variance is only an estimate — the true spread of the whole population could be a little tighter or a little wider than what your data shows. A chi square confidence interval calculator turns that uncertainty into a concrete range: a lower and upper bound for the population variance, built from your sample variance, your sample size, and the chi-square distribution that governs how sample variances behave.

This is the tool quality engineers, researchers, and Six Sigma practitioners reach for when consistency matters as much as the average. A process can hit its target mean perfectly and still be useless if its output varies wildly — and this calculator tells you, with stated confidence, just how wide that true variation plausibly is.

What This Calculator Does

This calculator builds a confidence interval for a population variance σ² using the chi-square distribution. You supply three inputs — the sample variance s² computed from your data, the sample size n, and a confidence level (90, 95, or 99 percent) — and it returns the lower and upper bounds of the interval, the degrees of freedom, the chi-square critical values it looked up, and a plain-language interpretation of the result.

The critical values come from a built-in approximation table covering the most common degrees of freedom: 5, 10, 15, 16, 20, 24, 25, 30, 40, 50, 60, 80, and 100. Because real chi-square tables are continuous and this one is a compact lookup, the calculator labels it honestly as an approximation — accurate to three decimals, which is more than enough for practical decision-making, but a lookup rather than an exact computation.

If your sample size gives degrees of freedom outside the table, the calculator tells you so directly and lists the supported values, instead of silently guessing. That explicit behavior keeps you from reporting an interval built on numbers that were never looked up.

How to Use This Calculator

Enter your sample variance s² first. This is the variance you computed from your actual data — the average of the squared deviations from the sample mean. If you only have the sample standard deviation s, square it before entering: a standard deviation of 2.05 becomes a variance of about 4.2.

Next enter the sample size n: the number of observations your variance was computed from. It must be a whole number of at least 2, because the degrees of freedom are n − 1 and the method needs at least one degree of freedom with data behind it. Then choose your confidence level — 95 percent is the standard default in most fields.

Press Calculate and the interval appears at the top of the result panel in (lower, upper) form, followed by each bound separately, the degrees of freedom, the two chi-square critical values from the table, the full arithmetic, and a one-sentence interpretation you can quote in a report.

The Chi-Square Formula for Variance Intervals

The interval rests on a beautiful statistical fact: when data comes from a normal population, the quantity (n − 1)s²/σ² follows a chi-square distribution with n − 1 degrees of freedom. Rearranging that relationship to trap the unknown σ² in the middle gives the confidence interval formula: the lower bound is (n − 1)s² divided by the upper chi-square critical value, and the upper bound is (n − 1)s² divided by the lower chi-square critical value.

Note the deliberate cross-over: the larger critical value produces the smaller bound and vice versa, because each critical value sits in a denominator. For a 95 percent interval you need the critical values that leave 2.5 percent in each tail of the chi-square distribution — χ² with 0.025 below it on the left and χ² with 0.975 below it on the right, for your degrees of freedom.

Unlike intervals for a mean, this interval is not symmetric around the sample variance. The chi-square distribution is skewed, especially at low degrees of freedom, so the interval stretches further upward than downward. That asymmetry is a feature, not a flaw — it honestly reflects that variance estimates are more uncertain on the high side.

Worked Example: s² = 4.2, n = 16, 95% Confidence

Suppose you measured 16 parts coming off a machine and computed a sample variance of 4.2 square millimeters. You want a 95 percent confidence interval for the true process variance. Here is the complete arithmetic.

Step one: degrees of freedom. df = n − 1 = 16 − 1 = 15. Step two: look up the chi-square critical values for 15 degrees of freedom at 95 percent confidence. The table gives 6.262 (the lower critical value, with 2.5 percent of the distribution below it) and 27.488 (the upper critical value, with 97.5 percent below it).

Step three: compute the numerator, (n − 1)s² = 15 × 4.2 = 63. Step four: the lower bound is 63 ÷ 27.488 = 2.2919, which rounds to 2.29. Step five: the upper bound is 63 ÷ 6.262 = 10.0601, which rounds to 10.06. The 95 percent confidence interval for the population variance is (2.29, 10.06).

Notice the asymmetry: the sample variance 4.2 sits closer to the lower bound than to the upper bound. That lopsided shape is the chi-square skew showing itself, and it is exactly why you should never "eyeball" a variance interval as the estimate plus-or-minus something.

A second example with a larger sample shows how intervals tighten. Take s² = 9 with n = 26 at 95 percent confidence: df = 25, critical values 13.120 and 40.646, numerator 25 × 9 = 225. Lower bound: 225 ÷ 40.646 = 5.5356 → 5.54. Upper bound: 225 ÷ 13.120 = 17.1494 → 17.15. The interval (5.54, 17.15) is proportionally narrower than the small-sample one — more data genuinely means less uncertainty.

Interpreting Your Interval

Read the interval as a plausibility range, not a guarantee about one specific number. "We are 95 percent confident the true variance lies between 2.29 and 10.06" means the procedure that built this interval captures the true variance in about 95 out of 100 repetitions. The true variance is a fixed unknown — it is the method that has the 95 percent reliability, not the parameter that has a 95 percent probability.

In practice, compare the whole interval against your specification, not just the point estimate. If a quality standard requires variance below 12, an interval of (2.29, 10.06) passes comfortably because even the pessimistic end stays under the limit. But an interval of (2.29, 14.50) would fail the same check even though the sample variance 4.2 looks fine — the uncertainty itself is the problem.

If you need the interval in original units rather than squared units, take square roots: the interval for the population standard deviation σ is simply (√2.29, √10.06), about (1.51, 3.17). Square-rooting each endpoint preserves the confidence level, which makes the result far easier to explain to non-statisticians.

About the Built-In Critical Value Table

The calculator carries a compact table of chi-square critical values for 13 common degrees-of-freedom values (5, 10, 15, 16, 20, 24, 25, 30, 40, 50, 60, 80, 100) at each of the three confidence levels. Each entry is rounded to three decimals from exact distribution values — for instance, the 95 percent values for df = 15 are 6.262 and 27.488 — so the table is an approximation in the honest sense: tabulated rather than computed on the fly, but accurate far beyond what applied work requires.

These df values were chosen because they cover the sample sizes people actually use: small pilot studies (n = 6 to 17), typical experiments (n = 21 to 31), and larger surveys (n = 41 to 101). If your degrees of freedom fall between table entries — say df = 22 — the calculator asks you to use a listed value rather than interpolating silently. For coursework this matches how printed chi-square tables work; for production statistics you would use software with the exact distribution.

One more table subtlety worth knowing: as degrees of freedom grow, the chi-square distribution becomes less skewed and the interval becomes more symmetric. Compare the df = 5 row (0.831 and 12.833 at 95 percent — wildly lopsided) with the df = 100 row (74.222 and 129.561 — nearly balanced around 100). Small samples punish you with wide, skewed intervals; that is the mathematics telling you to collect more data.

Common Mistakes to Avoid

The classic mistake is entering the standard deviation where the variance belongs. The formula needs s², the squared quantity. Entering s = 2.05 instead of s² = 4.2 understates the numerator and produces an interval that is wrong by a factor of the standard deviation itself — always square first.

Second, do not mix up which critical value goes in which denominator. The lower bound uses the larger critical value and the upper bound uses the smaller one — the cross-over feels backwards the first time, but dividing by a bigger number must give a smaller result. Swapping them inverts the interval into nonsense where the "lower" bound exceeds the "upper."

Third, remember the normality assumption. The chi-square interval is derived for data from a normal population, and it is sensitive to that assumption — heavy-tailed or strongly skewed data can distort it badly. For clearly non-normal data, consider a bootstrap interval instead. Finally, never report the interval without its confidence level: "(2.29, 10.06)" alone is just two numbers, while "a 95 percent interval of (2.29, 10.06)" is a statistical statement.

Frequently Asked Questions

1. What is a chi-square confidence interval for variance?

It is a range of plausible values for the true population variance σ², computed from your sample variance using the chi-square distribution. Instead of reporting only the point estimate s² = 4.2, you report an interval like (2.29, 10.06) that quantifies how uncertain that estimate is at your chosen confidence level.

2. Why use the chi-square distribution for variance?

Because of a proven statistical relationship: for data drawn from a normal population, the quantity (n − 1)s²/σ² follows a chi-square distribution with n − 1 degrees of freedom. That known distribution lets us work backward from the observed s² to a range that traps the unknown σ² with calibrated confidence.

3. Why is the interval not symmetric around the sample variance?

Because the chi-square distribution itself is skewed, particularly at low degrees of freedom. Variance estimates are genuinely more uncertain upward than downward — the mathematics stretches the interval further above s² than below it. A symmetric plus-or-minus interval would misrepresent that reality.

4. Which critical value goes in which bound?

The lower bound divides by the larger (upper-tail) critical value, and the upper bound divides by the smaller (lower-tail) critical value. For df = 15 at 95 percent: lower = 63 ÷ 27.488 = 2.29 and upper = 63 ÷ 6.262 = 10.06. The cross-over is deliberate — a bigger denominator always yields a smaller quotient.

5. What are degrees of freedom here?

Degrees of freedom equal n − 1, one less than your sample size. Intuitively, once the sample mean is fixed, only n − 1 observations are free to vary — the last one is determined by the mean. The chi-square distribution's shape depends on this number, so getting it right is essential.

6. Should I enter variance or standard deviation?

Variance — the squared quantity s². If your data summary gives a standard deviation of 2.05, square it to get 4.2025 and enter that. Entering the standard deviation directly is the single most common error with this calculation and it corrupts the entire interval.

7. What does 95 percent confidence mean for a variance interval?

It means the procedure works 95 percent of the time: if you repeated the sampling and interval-building process 100 times, about 95 of the resulting intervals would contain the true population variance. It does not mean there is a 95 percent probability that this particular interval contains it — the true variance is fixed, and the method is what carries the confidence.

8. How accurate is the built-in approximation table?

Very accurate for applied work. Each entry is rounded to three decimals from exact chi-square quantiles, so the lookup introduces error far smaller than the sampling uncertainty in your data. The "approximation" label is honesty about method — a compact table rather than a live distribution computation — not a warning about quality.

9. My degrees of freedom are not in the table. What now?

Use the nearest supported sample size, or pick the next lower tabled df value for a slightly conservative (wider) interval. The table covers df = 5, 10, 15, 16, 20, 24, 25, 30, 40, 50, 60, 80, and 100. For exact values at any other df, statistical software with the full chi-square distribution is the right tool.

10. Can I get an interval for the standard deviation instead?

Yes — take the square root of each endpoint. A 95 percent variance interval of (2.29, 10.06) becomes a 95 percent standard deviation interval of about (1.51, 3.17). The confidence level is preserved by this transformation, and standard-deviation units are usually easier to explain to non-technical audiences.

11. Why does a larger sample give a narrower interval?

Two forces work together: the numerator (n − 1)s² grows linearly with n, but the critical values also grow and draw closer together relative to n as degrees of freedom increase and the chi-square distribution becomes less skewed. Our second example showed this directly — n = 26 gave a proportionally tighter interval than n = 16 for similar variances.

12. Does my data need to be normally distributed?

Strictly speaking, yes — the chi-square derivation assumes a normal population, and this interval is more sensitive to that assumption than intervals for means are. With heavy-tailed or strongly skewed data the coverage can be badly off. For clearly non-normal data, a bootstrap confidence interval for the variance is a safer choice.

13. How is this different from a confidence interval for the mean?

A mean interval (built with z or t distributions) estimates where the center of the data lies; a variance interval (built with chi-square) estimates how spread out the data is. They answer different questions: the first is about location, the second about consistency. A process can have a perfect mean and a terrible variance interval.

14. What sample size do I need for a useful variance interval?

More than you might expect. Variance intervals are wide at small n — with n = 6 (df = 5), the 95 percent critical values 0.831 and 12.833 make the interval span more than a 15-to-1 ratio. If the interval will drive a quality or compliance decision, aim for n = 25 or more so the skew moderates and the bounds become practically informative.

15. Can the lower bound ever be zero or negative?

Not with valid inputs. The numerator (n − 1)s² is positive whenever s² is positive, and chi-square critical values are always positive, so both bounds stay positive. If you ever see a zero or negative bound, check your inputs — most likely a standard deviation was entered where the variance belonged, or the variance itself was mistyped.

Final Thoughts

A point estimate of variance tells you what your sample saw; a chi-square confidence interval tells you what the population might plausibly be. Build the habit of reporting the interval alongside the estimate, compare the full range against your specifications rather than just the midpoint, and let the width of the interval guide how much data you collect next time. Uncertainty you can measure is uncertainty you can manage.