Synology Capacity Calculator
Enter your drives and RAID level to see your true usable NAS storage.
Buying hard drives for a Synology NAS without doing the math first is one of the most expensive mistakes a home or small-business user can make. The size printed on the drive box is never the amount of storage you actually get to use, because every RAID level sets aside a different share of your disks for protection. The Synology Capacity Calculator takes the guesswork out of planning: enter your number of drives, the size of each drive, and your RAID level, and it instantly shows your true usable capacity. Run the numbers before you spend a single dollar, and you will never run out of room — or pay for space you cannot use.
What This Calculator Does
This calculator answers one straightforward question: after RAID protection takes its share, how much storage is actually left for your files? You give it three facts — how many drives you have, how big each drive is, and which RAID level you plan to use — and it works out your usable capacity with the real formula for that RAID level. It also shows the raw total of all your drives next to the usable figure, so you can see exactly what protection costs you. That number matters more than most people realize. It is the difference between a setup that holds your photo library with room to grow and one that fills up six months after you build it. This tool is tuned for the way Synology owners actually plan: whole drive counts, drive sizes in terabytes, and the five RAID levels you will meet most often on a Synology NAS. Whether you are pricing out your first two-bay unit or expanding a six-bay box, it hands you a clear figure to plan around.
How to Use the Synology Capacity Calculator
Using the calculator takes less than a minute. First, type the number of drives you plan to install — for example, 4. Second, type the size of each drive in terabytes — for example, 4 for four 4 TB drives. This calculator assumes all drives are the same size, which is how classic RAID levels work best. Third, pick your RAID level from the dropdown menu: RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10. Finally, press the Calculate Capacity button. Your usable capacity appears in the green result box below, together with the exact arithmetic the calculator used and the percentage of raw space reserved for protection. If you make a mistake — for example, choosing RAID 5 with only two drives — a red message explains what is wrong instead of giving you a misleading number. Press Reset any time to clear everything and start over.
How RAID Levels Change Your Usable Capacity
RAID decides how your data is spread across drives, and each method reserves a different amount of space for safety. RAID 0 stripes data across all drives with no protection at all, so usable capacity equals the number of drives times the drive size — fast, but one failed drive loses everything. RAID 1 mirrors everything onto a second drive, so with the standard two-drive setup your usable capacity equals a single drive; the second drive is a live copy, not extra room. RAID 5 spreads parity information across all drives, which costs you the equivalent of one full drive: usable capacity is the drive count minus one, times the drive size. It survives one drive failure and is the most popular choice for home NAS units with three or more drives. RAID 6 works like RAID 5 but writes double parity, costing two drives’ worth of space: usable capacity is the drive count minus two, times the drive size. It survives two simultaneous failures and is favored for business data and very large drives. RAID 10 combines mirroring and striping in pairs, so usable capacity is half your drives times the drive size. It needs an even number of drives — at least four — and it survives one failure in each mirrored pair while delivering strong speed.
Worked Examples With Full Arithmetic
Example 1 — the classic home setup. You buy 4 drives of 4 TB each and choose RAID 5. Step 1: raw capacity = 4 × 4 TB = 16 TB. Step 2: RAID 5 reserves one drive for parity = 4 TB. Step 3: usable = (4 − 1) × 4 TB = 3 × 4 TB = 12 TB. Protection costs you 4 TB out of 16 TB, which is 25 percent of your raw space.
Example 2 — a simple two-bay NAS. You install 2 drives of 8 TB and choose RAID 1. Step 1: raw capacity = 2 × 8 TB = 16 TB. Step 2: RAID 1 mirrors the drives, so usable space equals a single drive = 8 TB. Half of your raw space — 50 percent — buys you complete protection against one drive failure.
Example 3 — a business-grade array. You install 6 drives of 4 TB and choose RAID 6. Step 1: raw capacity = 6 × 4 TB = 24 TB. Step 2: RAID 6 reserves two drives for parity = 2 × 4 TB = 8 TB. Step 3: usable = (6 − 2) × 4 TB = 4 × 4 TB = 16 TB. You give up 8 TB out of 24 TB — about 33 percent — but you can lose any two drives at once and keep working.
Reading Your Result
The result box shows three things. The big number is your usable capacity — the storage your files, photos, and backups can actually occupy. Below it, the “how it was worked out” line repeats the arithmetic step by step, so you can check the math yourself or quote it when ordering drives. Finally, the protection cost tells you what share of your raw space goes to parity or mirroring. A low percentage means efficient storage; a high percentage means stronger safety. Compare that cost against the value of your data: family photos and business records usually justify the extra protection, while replaceable media downloads might not.
Choosing the Right RAID Level for Your NAS
For most home users with three or four drives, RAID 5 hits the sweet spot: you lose only one drive to parity and gain solid speed plus single-drive protection. Step up to RAID 6 when you have five or more drives, store anything irreplaceable, or use very large drives where rebuilds take days — the second parity drive is cheap insurance. RAID 10 is the pick when speed matters most, such as video editing straight from the NAS or running virtual machines; just remember it costs you half your raw space and demands an even drive count. RAID 1 suits simple two-bay setups where ease beats efficiency. RAID 0 has a place only for temporary scratch space where losing everything is acceptable — never for data you care about.
Common Mistakes to Avoid
First, buying drives before choosing a RAID level — decide the level first, then size your purchase with this calculator. Second, forgetting minimum drive counts: RAID 5 needs three, RAID 6 needs four, and RAID 10 needs an even four or more. Third, mixing drive sizes under classic RAID, where every drive is treated as the size of the smallest one and the extra space on larger drives is wasted. Fourth, ignoring rebuild times: a RAID 5 rebuild on large drives can take days, during which a second failure would be fatal — that is when RAID 6 earns its keep. Fifth, treating RAID as a backup. RAID protects you against drive failure, not against deletion, ransomware, or fire. Keep a real backup of anything irreplaceable.
Frequently Asked Questions
1. What is usable capacity on a Synology NAS?
Usable capacity is the storage left for your files after the RAID level reserves space for protection. A NAS with four 4 TB drives has 16 TB of raw space, but with RAID 5 only 12 TB is usable because one drive’s worth of space holds parity data.
2. Why is my usable capacity smaller than the total size of my drives?
Because RAID protection is never free. Every level except RAID 0 sets aside part of your disks — a full mirror copy, or one or two drives’ worth of parity — so the array survives drive failures. The calculator shows exactly how much each level reserves.
3. How much usable space does RAID 5 give me?
RAID 5 gives you the total of all drives minus one drive. With five 4 TB drives, that is (5 − 1) × 4 TB = 16 TB usable. It protects against one drive failure at a time.
4. How much usable space does RAID 6 give me?
RAID 6 gives you the total of all drives minus two drives. With six 4 TB drives, that is (6 − 2) × 4 TB = 16 TB usable. It protects against two simultaneous drive failures.
5. Can I use RAID 5 with only two drives?
No. RAID 5 spreads parity across the array and needs at least three drives to work. With two drives your realistic choices are RAID 1 for protection or RAID 0 for maximum space with no safety net.
6. What is the difference between RAID 1 and RAID 10?
RAID 1 mirrors one pair of drives, giving you a single drive’s worth of space. RAID 10 stripes data across multiple mirrored pairs, giving you half of your total drives’ space with much better speed. RAID 10 needs at least four drives; RAID 1 needs exactly two.
7. Does the calculator include the space used by the Synology operating system?
No. DSM reserves a small amount on each drive for the system itself, so your real-world usable space will be slightly lower than the calculator’s figure. Treat the result as a planning number, then leave a little headroom.
8. Should I enter drive sizes in TB as printed on the box?
Yes — enter the size printed on the box, like 4 for a 4 TB drive. Be aware that operating systems report slightly smaller numbers because of how terabytes are counted, but for planning with this calculator the box size is the right input.
9. Can I mix different drive sizes with classic RAID?
You can, but every drive is treated as the size of the smallest one, so the extra space on larger drives is wasted. If your drives differ in size, Synology Hybrid RAID (SHR) is the better choice — it reclaims most of that wasted space.
10. What happens to capacity when I add a drive later?
Adding a drive of the same size increases usable space according to your RAID formula — for RAID 5, each added drive adds one full drive of usable space. The storage pool must be expanded after the drive is installed before the new space appears.
11. Is RAID 0 ever a good choice for a NAS?
Only for temporary scratch data you can afford to lose, like video render caches. RAID 0 gives you every byte of your drives but no protection — a single failed drive destroys the entire volume. Never store anything irreplaceable on RAID 0.
12. How much free space should I keep on my NAS?
Aim to keep at least 10 to 20 percent free. A nearly full NAS slows down, and you need spare room for snapshots, sudden large backups, and the breathing space to replace a drive before things get critical.
13. Why does RAID 10 need an even number of drives?
RAID 10 works by mirroring drives in pairs and then striping across the pairs. An odd drive out cannot form a pair, so the level requires an even count — and Synology requires at least four drives for a RAID 10 volume.
14. Does keeping a hot spare change my usable capacity?
A hot spare does not add usable capacity — it sits idle until a drive fails, then rebuilds automatically. It costs you a drive bay and the price of the drive, but it shortens the dangerous window when your array runs without full protection.
15. Can I change RAID levels later without losing data?
Synology lets you migrate some RAID levels upward — for example RAID 1 to RAID 5, or RAID 5 to RAID 6 — without losing data, as long as you add the required drives. You cannot shrink a RAID level or reduce the drive count, so plan ahead with the calculator.
Final Thoughts
Storage planning is one of those jobs where five minutes of arithmetic saves hundreds of dollars and years of regret. The Synology Capacity Calculator gives you the honest number — usable terabytes after protection — before you buy a single drive. Pick your RAID level for the safety your data deserves, run the figures, and build a NAS that fits your life today with room to grow tomorrow.