Projector Calculator
From throw distance and throw ratio to screen width, height, and diagonal.
Screen Size Results
Buying a projector is the easy part. The real question comes when you unbox it and wonder: how big will the picture actually be on my wall? The answer depends on two numbers, the throw distance and the throw ratio, and getting them right is the difference between a crisp home theater and a blurry disappointment.
This projector calculator turns those two numbers into a screen size you can plan around. Enter how far the projector lens sits from the screen, enter the throw ratio from the projector's specifications, pick your aspect ratio, and you will get the screen width, height, and diagonal in both feet and inches, with the full arithmetic shown.
What This Calculator Does
Every projector spreads its image wider the farther it sits from the screen. The throw ratio describes exactly how fast the image grows: it is the distance divided by the image width. A projector with a throw ratio of 1.5 placed 10 feet from the wall produces an image 10 ÷ 1.5 ≈ 6.67 feet wide.
From that width, the calculator derives everything else. Using your chosen aspect ratio, it finds the image height, because a 16:9 screen is always 9/16 as tall as it is wide. Then it applies the Pythagorean theorem to the width and height to get the diagonal, which is the number manufacturers and retailers use to describe screen sizes. Every measurement is reported in feet and inches so it matches both spec sheets and tape measures.
The tool supports four common aspect ratios: 16:9 for widescreen HD and 4K content, 16:10 for many computer displays, 4:3 for classic presentations, and 21:9 for ultrawide cinema. The default is 16:9, which suits nearly all home theater setups.
How to Use This Calculator
Start by measuring the throw distance: the distance from the projector's lens to the screen or wall, in feet. Be careful to measure from the lens, not from the back of the projector or the wall behind it. A few inches of error here shifts the whole image size, so measure twice.
Next, enter the throw ratio. You will find it in the projector's manual or specifications page, written like 1.5:1. Enter just the first number, 1.5. Some projectors have a zoom lens, which means the throw ratio is a range such as 1.3–1.5; try both ends to see the smallest and largest images your projector can produce from the same spot.
Choose the aspect ratio that matches what you will watch most, then press Calculate. The screen width, height, and diagonal appear below the form. The Reset button clears everything for a new scenario, which is useful when comparing mounting positions.
Both the distance and the ratio must be positive numbers. If you leave a box empty or enter zero, the calculator explains the problem instead of showing a meaningless result.
Understanding Throw Ratio
The throw ratio is the single most important specification for planning a projector setup, yet it confuses many first-time buyers. Think of it as a recipe: for every 1 foot of image width, the projector needs the ratio's number of feet of distance. A ratio of 1.5 means 1.5 feet of distance per foot of width. A ratio of 2.0 means the projector must sit twice as far back for the same image, which suits long rooms.
Short-throw projectors have ratios below 1, sometimes as low as 0.5, and can fill a large screen from just a few feet away. These are ideal for small rooms where the projector sits on a table near the screen. Standard projectors fall around 1.5 to 2.0, and long-throw models go above 2.5 for auditoriums and large venues.
The formula the calculator uses is simply width = distance ÷ ratio. Once the width is known, the height follows from the aspect ratio: height = width × 9/16 for 16:9. The diagonal then comes from the Pythagorean theorem: diagonal = √(width² + height²). Notice that the diagonal is always a little larger than the width, which is why a "100-inch screen" sounds bigger than a screen that is 87 inches wide.
Worked Example: 10 Feet at a 1.5 Ratio
Suppose your projector sits 10 feet from the wall and its throw ratio is 1.5. Here is the complete calculation, exactly as the tool performs it.
First the width: 10 ÷ 1.5 = 6.6667 feet, which rounds to 6.67 feet. Multiply by 12 for inches: 6.6667 × 12 = 80.0 inches wide. For a 16:9 image, the height is 6.6667 × 9/16 = 3.75 feet, or 45.0 inches. The diagonal is √(6.6667² + 3.75²) = √(44.4444 + 14.0625) = √58.5069 ≈ 7.65 feet, which is 91.8 inches. So from 10 feet back, you get roughly a 92-inch screen.
Now a second example with different numbers. A projector 12 feet from the screen with a throw ratio of 1.2 gives a width of 12 ÷ 1.2 = 10.00 feet (120.0 inches). The 16:9 height is 10 × 9/16 = 5.625 feet, shown as 5.63 feet (67.5 inches). The diagonal is √(10² + 5.625²) = √131.6406 ≈ 11.47 feet, or 137.7 inches. A lower throw ratio from the same room gives a dramatically bigger picture.
You can also run the formula backward. If you want a 100-inch diagonal 16:9 screen, its width is 100 × 16/√(16² + 9²) ≈ 87.2 inches, or 7.26 feet. With a 1.5 throw ratio, the projector must sit 7.26 × 1.5 ≈ 10.9 feet from the screen. This reverse planning is how installers decide where to mount the projector before drilling any holes.
Reading and Using Your Results
The results panel lists width, height, and diagonal, each in feet with inches in parentheses. The width tells you how much wall space the image needs; compare it with your actual wall to make sure the picture fits with room to spare for speakers or curtains. The height helps you plan the vertical position: the center of the image should sit roughly at seated eye level.
The diagonal is the headline number for shopping. Screen manufacturers sell fixed screens by diagonal size, so if the calculator says 91.8 inches, you would shop for a 92-inch screen. The formula box under the results shows every step with your own numbers, which is handy to keep when discussing the setup with an installer.
Choosing the Right Aspect Ratio
Aspect ratio decides the shape of the rectangle. 16:9 is the widescreen standard for movies, TV, sports, and gaming; nearly all modern projectors default to it. If you watch mostly films, this is the right choice, and it fills the screen without black bars on most content.
16:10 is common on laptop and desktop displays, so it suits office and classroom projectors used with computers. 4:3 is the older television and presentation shape; choose it if you mainly show legacy slides or older video. 21:9 is the ultrawide cinema shape that matches many epic films without letterboxing, but everyday TV will show side bars on it. When in doubt, match the aspect ratio of the content you watch most.
Planning Your Room Around the Screen
Screen size is only half the plan; where you sit matters just as much. A popular guideline is to sit about 1.5 to 2.5 times the screen diagonal away from the screen. For a 92-inch screen (7.65 feet diagonal), that means seating roughly 11.5 to 19 feet back. Sit closer for a more immersive cinema feel, farther back for comfort with bright content.
Leave clearance around the image. The projected picture usually needs a few inches of margin on the screen frame, and the projector itself needs ventilation space and a power outlet nearby. Also consider ambient light: a bigger image spreads the projector's brightness over more area, so very large screens in bright rooms can look washed out. Darkening the room or choosing a higher-brightness projector solves this.
Common Mistakes to Avoid
The most frequent mistake is measuring the throw distance from the wrong point. Measure from the front of the lens to the screen surface. Measuring from the wall behind the projector or the back of its case can add a foot or more of error, which noticeably changes the image size.
Another mistake is entering the throw ratio backwards. The ratio is distance divided by width, so a projector 10 feet away making a 6.67-foot image has a ratio of 1.5, not 0.67. If your results look wildly wrong, check that you entered the ratio exactly as printed in the specifications.
People also forget that zoom lenses give a range, not a single ratio. A specification of 1.3–1.5:1 means the image can vary by about 15 percent from the same mounting point. Calculate both ends so you know the full range before you fix the mount in place. Finally, keep units consistent: this calculator works in feet, so convert any inch measurements by dividing by 12 first.
Frequently Asked Questions
1. What is throw ratio?
Throw ratio is the projector's distance from the screen divided by the width of the image it produces. A throw ratio of 1.5 means the projector must sit 1.5 feet back for every 1 foot of image width. You can find it in the projector's specifications, written like 1.5:1.
2. How do I calculate screen size from throw distance?
Divide the throw distance by the throw ratio to get the image width. Then use the aspect ratio for the height; for 16:9, height = width × 9/16. Finally, the diagonal = √(width² + height²). This calculator does all three steps automatically.
3. What is throw distance exactly?
Throw distance is the measurement from the front of the projector's lens to the surface of the screen or wall. It is not the distance from the wall behind the projector or from the back of the projector's case. Measure carefully, because even a few inches of error changes the image size.
4. What throw ratio do I need for my room?
Divide your available mounting distance by the image width you want. If you can mount 12 feet back and want an 8-foot-wide image, you need a ratio of 12 ÷ 8 = 1.5. Small rooms need short-throw projectors with ratios under 1, while long rooms suit standard ratios of 1.5 to 2.0.
5. What is a short-throw projector?
A short-throw projector has a throw ratio below 1, so it produces a large image from very close to the screen. Some can fill a 100-inch screen from just 3 to 4 feet away. They are ideal for small rooms, classrooms, and setups where the projector sits on a table near the wall.
6. How is screen size measured?
Screen size is the diagonal of the image, measured in inches from one corner to the opposite corner. A "100-inch screen" is 100 inches diagonally, not 100 inches wide. For a 16:9 screen, a 100-inch diagonal is about 87 inches wide and 49 inches tall.
7. What aspect ratio should I choose?
Choose 16:9 for movies, TV, sports, and gaming, since it matches nearly all modern content. Pick 16:10 for computer-heavy office use, 4:3 for legacy presentations, and 21:9 for a dedicated cinema room focused on films. Match the ratio to whatever you watch most.
8. How far should I sit from a projector screen?
A common guideline is 1.5 to 2.5 times the screen diagonal. For a 92-inch screen, that is roughly 11.5 to 19 feet. Sitting closer feels more immersive, like a cinema; sitting farther is more comfortable for bright content and long viewing sessions.
9. Does zoom affect the throw ratio?
Yes. A zoom lens gives a range of throw ratios, such as 1.3–1.5:1, instead of a single number. Zooming in increases the effective ratio and shrinks the image; zooming out decreases it and enlarges the image. Calculate both ends of the range to see your smallest and largest possible images.
10. Can I use this calculator for a TV instead of a projector?
Not directly, because TVs do not have a throw ratio; their screen size is fixed. However, the aspect-ratio math still applies: for any 16:9 screen, the width is the diagonal × 0.872 and the height is the diagonal × 0.490. Use those factors to find a TV's width and height from its advertised diagonal.
11. Why is my projected image bigger than the calculator says?
The usual causes are measuring the throw distance from the wrong point, entering the throw ratio backwards, or having the zoom set to its wide end. Check the measurement from the lens, confirm the ratio matches the specification sheet, and note the zoom position before recalculating.
12. How bright should my projector be for a large screen?
Brightness is spread over the image area, so doubling the screen width quarters the brightness per square inch. For screens above 100 inches, look for higher lumen ratings, and control ambient light with curtains or by watching in the evening. A dark room matters more than raw lumens for image quality.
13. Should I buy the screen before or after mounting the projector?
Plan first, buy second. Use the calculator to find the image size from your mounting position, then buy a screen that matches the calculated diagonal. Mounting the projector first and measuring the actual projected image on the wall is even better, since it confirms the real-world numbers before you spend money.
14. What is keystone correction, and does it change screen size?
Keystone correction digitally straightens an image when the projector is angled up or down, but it slightly reduces the usable image area and can soften the picture. It is better to mount the projector level with the screen center using lens shift if available, and reserve keystone for small adjustments.
15. Can the calculator handle metric measurements?
The calculator works in feet, but the math is unit-independent. If you enter the distance in meters, the width, height, and diagonal come out in meters too, and the inch conversions will not apply. For the inch figures to be correct, convert your distance to feet first by dividing inches by 12.
Final Thoughts
A great home theater starts with two numbers and a tape measure. Once you know your throw distance and your projector's throw ratio, the screen size is simple arithmetic, and this calculator handles it in seconds. Plan the image size before you mount anything, leave room for seating and speakers, and you will end up with a picture that fills the wall beautifully instead of a surprise that does not fit.