Fractional Excretion Of Sodium Calculator
Compute FENa from urine and plasma labs and see whether the pattern fits prerenal azotemia or acute tubular necrosis.
When creatinine rises suddenly, clinicians face one urgent question: is the kidney failing because blood is not reaching it, or because the kidney tissue itself is injured? The answer changes treatment completely — fluids help the first case and can harm the second. The fractional excretion of sodium, or FENa, is the classic laboratory calculation used to tell these two situations apart, and this calculator performs it instantly from four routine lab values.
FENa measures what fraction of the sodium filtered by the kidneys ends up in the urine. Healthy kidneys under low blood flow cling to sodium desperately, so very little appears in the urine and FENa is low. Injured kidney tubules cannot reabsorb sodium properly, so more spills into the urine and FENa is high. That single contrast — conservation versus wasting — is what makes the number so informative. This is an educational tool, not medical advice: kidney injury is a medical emergency, and all lab results must be reviewed with a qualified healthcare professional.
What the Fractional Excretion Of Sodium Calculator Does
This calculator computes FENa as a percentage from four inputs: urine sodium, plasma sodium, urine creatinine, and plasma creatinine. It shows the formula, substitutes your numbers step by step so every part of the arithmetic is visible, and then interprets the result: below 1 percent suggests a prerenal pattern, 1 to 2 percent is indeterminate, and above 2 percent suggests an acute tubular necrosis pattern.
It also asks whether the patient is taking a diuretic. That question matters enormously, because diuretics force the kidneys to excrete sodium and can push FENa above 2 percent even when the real problem is prerenal. If the answer is yes, the calculator warns that the result may be falsely high and suggests asking the clinician about fractional excretion of urea instead, which remains reliable during diuretic use.
How to Use the Calculator
Enter the urine sodium in mEq/L, taken from a spot urine sample — the classic teaching example uses a low value like 20. Enter the plasma (serum) sodium in mEq/L, normally around 135 to 145. Enter the urine creatinine in mg/dL, which is much more concentrated than blood — values like 40 to 100 are common. Enter the plasma creatinine in mg/dL, the same value used to track kidney function day to day. All four usually come from labs drawn at roughly the same time.
Then answer the diuretic question honestly. Furosemide, bumetanide, hydrochlorothiazide, and similar drugs all invalidate the standard interpretation, and the calculator needs to know. Press Calculate to see the FENa percentage, the full arithmetic, the interpretation, and any diuretic warning. The valid ranges are urine sodium 0 to 500, plasma sodium 100 to 180, urine creatinine above 0 to 1000, and plasma creatinine above 0 to 30.
The FENa Formula Explained
The formula is FENa = (urine sodium × plasma creatinine) ÷ (plasma sodium × urine creatinine) × 100. It looks complicated, but the logic is elegant. Creatinine is filtered by the kidneys and barely reabsorbed, so the ratio of urine creatinine to plasma creatinine tells us how much water was reabsorbed — it is the concentration factor. Sodium, meanwhile, is heavily reabsorbed by healthy tubules. Dividing the sodium ratio by the creatinine concentration factor cancels out the effect of water reabsorption, leaving a pure measure of how the tubules handled sodium.
Multiplying by 100 turns it into a percentage: the percentage of filtered sodium that was excreted. In a prerenal state — low blood flow from dehydration, bleeding, or heart failure — the kidneys avidly reclaim sodium and water, so the excreted fraction drops below 1 percent. In acute tubular necrosis, the damaged tubules cannot reclaim sodium, so the excreted fraction rises above 2 percent. Between 1 and 2 percent, the test cannot distinguish the two, and clinicians look to the history, the physical exam, and other tests.
Worked Example 1: A Prerenal Pattern
Take a patient with urine sodium 20 mEq/L, plasma sodium 140 mEq/L, urine creatinine 60 mg/dL, and plasma creatinine 1.0 mg/dL, not on diuretics. Step one: the numerator is urine sodium × plasma creatinine = 20 × 1.0 = 20. Step two: the denominator is plasma sodium × urine creatinine = 140 × 60 = 8,400. Step three: divide, 20 ÷ 8,400 = 0.002381. Step four: multiply by 100 to get 0.238 percent.
The calculator displays FENa = 0.238% with a prerenal azotemia pattern. The interpretation: the kidneys are holding on to sodium, which points to low blood flow — dehydration, blood loss, or poor cardiac output — rather than direct injury to the kidney tissue. The expected clinical response is to restore perfusion, typically with fluids, while searching for the cause of the low flow. This is the textbook use of FENa, and it is why the test has survived decades of newer biomarkers.
Worked Example 2: An ATN Pattern
Now consider urine sodium 80 mEq/L, plasma sodium 138 mEq/L, urine creatinine 40 mg/dL, and plasma creatinine 1.5 mg/dL, not on diuretics. Step one: the numerator is 80 × 1.5 = 120. Step two: the denominator is 138 × 40 = 5,520. Step three: 120 ÷ 5,520 = 0.021739. Step four: × 100 = 2.174 percent.
The calculator displays FENa = 2.174% with an acute tubular necrosis pattern. Here the kidneys are wasting sodium despite the injury — the tubules are too damaged to reabsorb it — which suggests intrinsic kidney injury such as ATN from prolonged low blood flow, toxins, or sepsis. Notice how the urine sodium alone (80 versus 20) already hinted at the answer, but the full formula corrects for concentration: a dilute urine can make sodium look deceptively low or high, and the creatinine ratio removes that distortion.
How to Read Your Result
Read the percentage first, then the pattern label. Below 1 percent means the kidneys are conserving sodium — think prerenal causes and check volume status, blood pressure, and cardiac function. Above 2 percent means the kidneys are wasting sodium — think intrinsic injury and look for nephrotoxins, sepsis, or prolonged ischemia. Between 1 and 2 percent, the test is genuinely unhelpful on its own, and that is an honest result: no single number diagnoses kidney injury.
Always read the result alongside the diuretic flag. A FENa of 3 percent in a patient on furosemide proves nothing about ATN, because the drug itself drives sodium into the urine. The calculator’s warning in that situation is not a footnote — it is the most important line on the screen. The same caution applies in chronic kidney disease, where baseline sodium handling is already abnormal.
Common Mistakes to Avoid
The most dangerous mistake is trusting FENa in a patient on diuretics without adjustment. Diuretic use is common in exactly the patients being evaluated for kidney injury — heart failure, liver disease, hypertension — so the confounder is everywhere. When diuretics are on board, guidelines point to fractional excretion of urea (FEUrea) instead, with a cutoff around 35 percent serving a similar role.
Other pitfalls: using labs drawn many hours apart, since the formula assumes the blood and urine reflect the same moment; forgetting that contrast dye, muscle injury, and urinary obstruction can distort the result; and treating the 1 and 2 percent cutoffs as absolute laws rather than guides. FENa is one data point in a clinical picture that includes the history, the exam, the urine sediment, and the trend of creatinine over time. No calculator replaces that judgment.
Frequently Asked Questions
1. What does FENa actually measure?
It measures the percentage of sodium filtered by the kidneys that is excreted in the urine. Low values mean the tubules are reabsorbing sodium avidly; high values mean the tubules are letting sodium escape.
2. What is a normal FENa?
There is no single normal value, because FENa is interpreted in the context of acute kidney injury. In healthy people it is typically well below 1 percent. The clinical cutoffs — below 1 percent prerenal, above 2 percent ATN — apply when evaluating a rising creatinine.
3. Why is the cutoff 1 percent versus 2 percent?
These thresholds come from decades of clinical studies comparing FENa against the final diagnosis. Below 1 percent, prerenal causes dominate; above 2 percent, acute tubular necrosis dominates. The 1 to 2 percent zone is where the two overlap too much to separate.
4. Do diuretics really ruin the test?
Yes. Diuretics block sodium reabsorption by design, so they raise urine sodium and FENa regardless of the underlying cause of kidney injury. A prerenal patient on furosemide can easily show a FENa above 2 percent. This is the test’s best-known limitation.
5. What is FEUrea and when is it used?
Fractional excretion of urea applies the same idea to urea instead of sodium. Because diuretics affect sodium handling far more than urea handling, FEUrea stays interpretable during diuretic therapy, with values below about 35 percent suggesting prerenal causes.
6. Can FENa distinguish all causes of kidney injury?
No. It is designed for one specific distinction — prerenal azotemia versus acute tubular necrosis — in oliguric kidney injury. It does not diagnose glomerulonephritis, obstruction, or other causes, and it performs poorly in non-oliguric injury and chronic kidney disease.
7. Why does the formula use creatinine?
Creatinine is freely filtered and minimally reabsorbed, so the urine-to-plasma creatinine ratio measures how much water the kidneys reabsorbed. Dividing the sodium ratio by this concentration factor isolates tubular sodium handling from simple water reabsorption.
8. What units do the inputs use?
Urine and plasma sodium in mEq/L (equivalent to mmol/L for sodium), and urine and plasma creatinine in mg/dL. The units cancel in the ratio, but entering consistent units as labeled keeps the arithmetic correct.
9. Does it matter if the labs were drawn hours apart?
Yes. The formula assumes the blood and urine samples reflect the same physiological moment. Labs drawn far apart — especially around fluid resuscitation or diuretic doses — can give a misleading result.
10. What does a FENa between 1% and 2% mean?
It means the test cannot separate prerenal from intrinsic causes. This happens in early or evolving injury, mixed causes, and some non-oliguric states. Clinicians then rely on the history, exam, urine microscopy, and response to a fluid challenge.
11. Can FENa be low in ATN?
Occasionally. Early obstruction, contrast-related injury, muscle breakdown, and some forms of glomerulonephritis can produce a low FENa despite intrinsic disease. The test is a guide with known exceptions, not an absolute rule.
12. Is a spot urine sample enough?
Yes — FENa was designed for spot urine and blood samples, which is part of its appeal. A timed 24-hour collection is not required, though the samples should be contemporaneous.
13. How quickly can FENa change?
Within hours. As perfusion is restored or injury evolves, tubular sodium handling changes, and so does FENa. A single value is a snapshot; trends across repeated measurements are more informative.
14. Should patients calculate their own FENa?
Patients can use this calculator to understand what their care team is looking at, but interpretation requires clinical context — medications, volume status, and the full lab picture. Never change treatment based on a self-calculated value; discuss it with your clinician.
15. What should I do with a high FENa result?
If you are a clinician, integrate it with the full clinical picture and act on the underlying cause. If you are a patient, bring the number to your care team promptly. Sudden kidney injury is a medical emergency — do not wait, and do not self-treat based on this calculator.
Final Thoughts
The fractional excretion of sodium distills four routine labs into one powerful percentage: 0.238 percent whispering prerenal, 2.174 percent pointing to injured tubules. Used with its limitations in mind — contemporaneous labs, no diuretics, clinical context — it remains one of the most elegant calculations in medicine. Run the numbers, respect the caveats, and always let a qualified professional make the call.