Benjamin Moore Paint Calculator
How much paint does your project need? Add your rooms, deduct doors and windows, and get gallons plus estimated cost.
Nothing derails a painting weekend faster than running out of paint on a Sunday afternoon — or the opposite embarrassment, a garage shelf full of half-used gallons you will never open again. The difference between those two outcomes is about two minutes of arithmetic: how many square feet of wall you actually have, minus the doors and windows you will not paint, times the number of coats, divided by what a gallon covers. The Benjamin Moore Paint Calculator does that arithmetic for you across as many rooms as your project has. Add a room for each space, enter its dimensions and openings, set your coats and coverage, and it tells you exactly how many gallons to buy and roughly what they will cost.
This matters more than it looks, because paint is one of those materials where guessing is expensive in both directions. Buy too little and you make a second trip, risk a color batch mismatch between cans, and lose a day. Buy too much and quality interior paint — Benjamin Moore’s popular lines included — is not cheap to waste. The calculator rounds up to whole gallons (you cannot buy 1.65 gallons), deducts a realistic 21 square feet per door or window, and shows its work room by room so you can sanity-check every number. It is brand-neutral math applied to your project; “Benjamin Moore” is simply the paint context, and the method works for any manufacturer’s paint once you enter that paint’s stated coverage.
What This Calculator Does
This calculator estimates how many gallons of paint your project needs and what they will cost. For each room you enter the length, width, wall height, and the number of doors plus windows. It computes each room’s wall area as 2 × (length + width) × height, subtracts 21 square feet per door or window (a typical allowance), and sums the paintable area across all rooms — you can add up to 10 rooms with the “Add another room” control. It then multiplies the total area by your number of coats, divides by the coverage per gallon (pre-filled at 375 sq ft, inside the typical 350–400 range), and rounds up to whole gallons. Finally it multiplies gallons by your price per gallon for the cost estimate. The result shows the per-room breakdown, total area, gallons needed, and estimated cost, with every step of the arithmetic visible.
How to Use the Calculator
Start with Room 1, pre-filled as a 12 × 10 ft room with 8 ft ceilings and 2 openings so you can press Calculate immediately. Measure each room’s length and width in feet, and the wall height — standard ceilings are 8 ft, but measure if yours differ. Count every door and window in the room; each one deducts 21 sq ft. If your project has more rooms, click “+ Add another room” (or remove one with “− Remove last room”). Then set the number of coats — two is standard for a color change, one may suffice for a refresh in a similar color — and check the coverage per gallon against your paint can’s label (350–400 sq ft per gallon is typical for quality interior paint). Enter the price per gallon if you want the cost estimate, then press Calculate. Press Reset to start over.
The Paint Formula, Explained
The formula has four steps. Step one finds each room’s gross wall area: wall area = 2 × (length + width) × height. This is the perimeter of the room times the height — all four walls. Step two removes what you won’t paint: paintable area = wall area − (doors + windows) × 21 sq ft. The 21 sq ft figure is a standard allowance for an average door or window including its trim zone. Step three scales for coverage: gallons = total paintable area × coats ÷ coverage per gallon, rounded UP to the next whole gallon, because paint is sold by the gallon and a partial gallon still requires buying the whole can. Step four prices it: estimated cost = gallons × price per gallon. Ceilings are not included — if you’re painting ceilings too, add them as extra “rooms” using ceiling length × width as a flat area (or measure them separately).
Worked Example 1: One Bedroom, Two Coats
Take the default scenario: one room, 12 × 10 ft, 8 ft walls, 2 doors/windows, 2 coats, 375 sq ft/gal coverage, $50 per gallon. Step one: wall area = 2 × (12 + 10) × 8 = 2 × 22 × 8 = 352 sq ft. Step two: paintable area = 352 − 2 × 21 = 352 − 42 = 310 sq ft — exactly what the calculator shows for Room 1. Step three: paint area = 310 × 2 coats = 620 sq ft; gallons = 620 ÷ 375 = 1.65, rounded up to 2 gallons. Step four: cost = 2 × $50.00 = $100.00. So one bedroom needs 2 gallons and about $100 of paint. Notice the rounding: you only truly need 1.65 gallons, but since paint isn’t sold in fractions, you buy 2 and keep a third of a gallon for touch-ups — which is genuinely useful to have.
Worked Example 2: Two Rooms, $60 Paint
Now a bigger project with two rooms, 2 coats, 375 sq ft/gal, $60 per gallon. Room 1: 14 × 12 ft, 9 ft walls, 3 openings. Wall area = 2 × (14 + 12) × 9 = 2 × 26 × 9 = 468 sq ft; paintable = 468 − 3 × 21 = 468 − 63 = 405 sq ft. Room 2: 10 × 10 ft, 8 ft walls, 1 opening. Wall area = 2 × (10 + 10) × 8 = 320 sq ft; paintable = 320 − 1 × 21 = 299 sq ft. Total paintable = 405 + 299 = 704 sq ft. Paint area = 704 × 2 = 1,408 sq ft; gallons = 1,408 ÷ 375 = 3.75, rounded up to 4 gallons. Cost = 4 × $60.00 = $240.00. Two rooms, four gallons, $240 — and the per-room rows in the result let you verify each room’s 405 and 299 sq ft figures independently.
Worked Example 3: Single Refresh Coat
Finally, a one-coat refresh: one room, 16 × 12 ft, 8 ft walls, 2 openings, 1 coat, 375 sq ft/gal, $45 per gallon. Step one: wall area = 2 × (16 + 12) × 8 = 2 × 28 × 8 = 448 sq ft. Step two: paintable = 448 − 2 × 21 = 448 − 42 = 406 sq ft. Step three: paint area = 406 × 1 = 406 sq ft; gallons = 406 ÷ 375 = 1.08, rounded up to 2 gallons. Step four: cost = 2 × $45.00 = $90.00. This example shows why the round-up matters most on small jobs: you need barely over one gallon, but you still buy two. It also shows the value of the openings deduction — without it you’d compute 448 sq ft and might wrongly conclude you need the same 2 gallons with less margin, masking how tight the real coverage is.
Reading Your Results
The headline gives you the two numbers you came for: gallons to buy and the estimated cost. Below it, the per-room rows show each room’s paintable area with its full arithmetic (walls minus openings), so you can check the measurements room by room — if one room’s figure looks off, remeasure that room. The total-area row confirms the sum, and the gallons row shows the exact division before rounding up, which tells you how tight the estimate is: 1.65 gallons means comfortable margin in 2 cans; 1.98 gallons means you’re buying 2 cans with almost nothing to spare, so consider a third can for safety. The cost row is gallons × your entered price — update the price to match your actual paint line for a realistic budget.
Coverage, Coats, and Getting It Right
Coverage per gallon is the most misunderstood input. The 350–400 sq ft per gallon printed on quality interior paints assumes smooth, primed drywall and one coat; rough, porous, or unprimed surfaces can drink noticeably more, while previously painted smooth walls in a similar color may stretch further. Dark-to-light color changes almost always need two full coats plus sometimes a tinted primer — budget the extra coat rather than hoping. The 21 sq ft per opening is a planning average: a big sliding door is larger, a small bathroom window is smaller, but across a whole room the average holds well. And always buy all gallons for one color at once, ideally from the same batch — mixing cans (“boxing” the paint) evens out tiny batch-to-batch color differences that are invisible in the store but obvious on the wall.
Common Mistakes to Avoid
The biggest mistake is measuring the floor area instead of the wall area — a 12 × 10 ft room has 120 sq ft of floor but 352 sq ft of walls, nearly triple. Second, forgetting to deduct doors and windows, which inflates the estimate by 40+ sq ft per average room. Third, entering ceiling height wrong: vaulted or 9–10 ft ceilings add a lot of area versus the standard 8 ft. Fourth, planning exactly the computed gallons with no margin — the calculator already rounds up, but textured walls or a thirsty primer coat can still push you over, so pros add about 10% on difficult surfaces. Fifth, using the wrong coverage figure: always check your actual paint can, because bargain paints may cover far less than the 375 default, and that changes the gallon count dramatically.
Frequently Asked Questions
1. What is the Benjamin Moore Paint Calculator?
It is a paint quantity estimator framed around Benjamin Moore–type interior paint projects. You enter each room’s dimensions, doors and windows, coats, coverage per gallon, and price, and it calculates how many gallons to buy and the estimated cost, with a per-room breakdown.
2. How many gallons of paint do I need per room?
It depends on the room’s wall area. A typical 12 × 10 ft bedroom with 8 ft ceilings has about 310 sq ft of paintable wall after deducting openings, which needs 2 gallons for two coats at 375 sq ft per gallon. Enter your exact dimensions for your answer.
3. How is paintable wall area calculated?
Wall area equals 2 × (length + width) × height — the room’s perimeter times its height. Then 21 sq ft is subtracted for each door and window. The result is the net wall surface your paint must cover.
4. Why 21 square feet per door or window?
It is a widely used planning average for a standard door or window including its trim area. Individual openings vary, but across a whole room the average estimates the deduction accurately enough for buying paint.
5. Why does the calculator round up to whole gallons?
Because paint is sold in whole gallons (and quarts). If the math says 1.65 gallons, you must buy 2 — and the leftover is genuinely useful for future touch-ups, which every painted room eventually needs.
6. What coverage per gallon should I enter?
Check your paint can’s label — that figure always wins. As a starting point, 350–400 sq ft per gallon is typical for quality interior paints like Benjamin Moore’s popular lines on smooth, primed drywall.
7. How many coats do I need?
Two coats is the standard for a color change and gives the depth and durability paint is formulated for. One coat can work for a refresh in a very similar color on walls in good condition. Dark-to-light changes may need a primer plus two coats.
8. Does this include the ceiling?
No — only walls. If you’re painting the ceiling too, compute its area (length × width) and add it to a room’s wall area, or run the calculator with an extra room representing the ceiling and 0 openings.
9. Does it work for exterior paint?
The math works the same — wall area minus openings, times coats, divided by coverage — but exterior coverage per gallon is often lower and surfaces vary more. Enter your exterior paint’s stated coverage and add margin for rough siding or masonry.
10. How accurate is the cost estimate?
As accurate as the price per gallon you enter. Paint lines vary widely in price, so update the price field to match the actual product you’re buying — the calculator multiplies it by the rounded-up gallon count.
11. Should I buy extra paint beyond the estimate?
The round-up to whole gallons already builds in a buffer. On smooth walls that’s enough; on textured, porous, or unprimed surfaces, pros add roughly 10% more. Keeping leftover paint for touch-ups is always wise.
12. What is “boxing” paint and should I do it?
Boxing means mixing all your gallons of one color together in a larger bucket before painting, which evens out tiny color differences between manufacturing batches. It’s cheap insurance on multi-gallon jobs.
13. Can I use this for primer?
Yes — run the calculator with 1 coat and your primer’s coverage per gallon (primers often cover less than topcoats). Primer is especially worthwhile when painting over dark colors, bare drywall, or patched areas.
14. Why is my estimate higher than the store’s quick calculator?
Store tools often use floor area or skip the openings deduction and rounding. This calculator measures actual wall area, deducts openings, and rounds up to purchasable gallons — the realistic number, which is usually a little higher and far less likely to leave you short.
15. Is this affiliated with Benjamin Moore?
No. This is an independent estimator using standard paint-coverage math, framed for Benjamin Moore–type interior paint projects. Coverage and pricing vary by product line, so always confirm against your actual paint can’s label.
Final Thoughts
Painting goes wrong most often before the first brushstroke — in the planning. The Benjamin Moore Paint Calculator turns that planning into two minutes of measuring and one click: real wall area, honest deductions for every door and window, coats counted, coverage respected, gallons rounded up to what you can actually buy, and a cost figure you can budget against. Measure carefully, check the coverage on your actual can, buy all your gallons at once, and keep the leftovers for touch-ups. Do that, and the only surprise on painting weekend will be how good the finished room looks.