Arizona Payroll Calculator
The employer’s view: gross wages plus employer FICA, FUTA, SUTA, and workers’ comp — the true cost of each hire.
A $50,000 salary never costs an employer $50,000. On top of gross wages, an Arizona business pays the employer’s share of Social Security and Medicare, federal and state unemployment taxes, and workers’ compensation insurance — a markup that typically runs 9 to 12 percent before a single benefit is added. The Arizona Payroll Calculator above is built for the employer’s side of the desk: enter what you pay the employee, and it totals what the employee actually costs you.
This is the number that matters when you are deciding whether you can afford a hire, pricing a contract that includes labor, or comparing a W-2 employee against a contractor. Most small-business owners in Phoenix, Tucson, and Flagstaff learn the markup the hard way — after the first quarterly tax deposit. Running the math first turns hiring from a gut decision into a budgeted one, and the calculator’s team multiplier extends the same logic across a whole crew at one wage level.
What the Arizona Payroll Calculator Does
The Arizona Payroll Calculator estimates the total annual cost of employing one worker in Arizona at a given wage. You enter the employee’s annual gross wages, how many employees earn that wage, and three editable rates — FUTA, SUTA, and workers’ compensation — each pre-filled with a clearly labeled sample figure. The calculator then adds the four layers of employer payroll cost: the employer FICA match (6.2% Social Security up to the wage base plus 1.45% Medicare on all wages, mirroring what the employee pays), FUTA on the first $7,000 of wages, SUTA on the first $8,000 of Arizona wages, and workers’ comp priced per $100 of payroll.
The result card leads with total employer cost per employee per year, followed by a breakdown table showing every tax and the “tax markup” — employer taxes as a percentage of wages, the single most useful figure for budgeting. When you enter more than one employee, it also shows the team total. A planning note reminds you what the estimate leaves out: Arizona state income tax is withheld from the employee’s wages and is not an employer cost, and benefits, paid time off, and payroll service fees sit outside this calculation.
How to Use the Calculator
Enter the employee’s annual gross wages — salary plus expected overtime and bonuses, since employer taxes apply to total wages, not just base salary. Set the number of employees only if you are costing out a group hired at the same wage, such as three warehouse associates at $40,000; for a single hire, leave it at 1. The three rate fields come pre-filled with sample figures: 0.6% FUTA, 2.0% SUTA, and $1.50 workers’ comp per $100 of payroll. Adjust them if you know your real numbers — your SUTA rate in particular depends on your unemployment claims history, and your comp rate depends on your industry classification code.
Press Calculate and look at the tax markup first: it tells you, per $100 of wages, how many extra dollars payroll taxes add. Use the per-employee total when deciding on an individual hire, and the team total when budgeting a department. Run the calculator at a few wage levels before posting a job ad — a $5,000 higher salary typically carries $450–$600 in additional employer taxes, which belongs in the offer math, not discovered afterward.
How Employer Payroll Cost Is Calculated
The calculation stacks four employer obligations on top of gross wages. First, the employer FICA match: Social Security at 6.2% of wages up to the $176,100 wage base, plus Medicare at 1.45% of all wages — together 7.65%, exactly mirroring the employee’s share. This is almost always the largest employer tax. Second, FUTA (federal unemployment tax): the sample 0.6% applies only to the first $7,000 of each employee’s annual wages, which caps it at $42 per employee per year — small per head, but it is real money across a large crew.
Third, SUTA (Arizona state unemployment tax): the sample 2.0% applies to the first $8,000 of Arizona wages, capping at $160 per employee per year at the sample rate. Real SUTA rates vary widely by employer — new employers pay a set new-employer rate, and experienced employers are rated on their claims history, so treat the sample as a placeholder for your actual rate. Fourth, workers’ compensation: priced per $100 of payroll, so at the $1.50 sample a $50,000 employee costs $750 a year; real rates swing dramatically by risk class, from under $1 for office work to several dollars for roofing or framing. Total employer cost equals gross wages plus all four layers; the markup percentage equals employer taxes divided by gross wages.
Worked Examples
Example 1 — one employee at $50,000, sample rates (FUTA 0.6%, SUTA 2.0%, workers’ comp $1.50 per $100). Employer Social Security = 50,000 × 6.2% = $3,100.00; employer Medicare = 50,000 × 1.45% = $725.00; FICA match = $3,825.00. FUTA = 0.6% × 7,000 = $42.00 (the $7,000 wage base caps it). SUTA = 2.0% × 8,000 = $160.00 (the $8,000 Arizona base caps it). Workers’ comp = 1.50 ÷ 100 × 50,000 = $750.00. Total employer payroll taxes = 3,825 + 42 + 160 + 750 = $4,777.00. Total employer cost = 50,000 + 4,777 = $54,777.00 per year. Tax markup = 4,777 ÷ 50,000 = 9.6%. A $50,000 hire costs $54,777 before benefits.
Example 2 — three employees at $40,000 each, same sample rates. Per employee: Social Security = 40,000 × 6.2% = $2,480.00; Medicare = 40,000 × 1.45% = $580.00; FICA = $3,060.00. FUTA = $42.00; SUTA = $160.00; workers’ comp = 1.50 ÷ 100 × 40,000 = $600.00. Employer taxes per head = 3,060 + 42 + 160 + 600 = $3,862.00. Cost per employee = 40,000 + 3,862 = $43,862.00. Team of three = 43,862 × 3 = $131,586.00 per year. Markup = 3,862 ÷ 40,000 = 9.7%. Notice the unemployment taxes barely move with wages — FUTA and SUTA are capped so low that they are nearly flat per head, which is why the markup percentage actually rises slightly as wages fall.
Example 3 — one part-time employee at $9,000, same sample rates. Social Security = 9,000 × 6.2% = $558.00; Medicare = 9,000 × 1.45% = $130.50; FICA = $688.50. FUTA = 0.6% × 7,000 = $42.00 — the full $7,000 base applies even though wages are only $9,000. SUTA = 2.0% × 8,000 = $160.00 — again the full base applies. Workers’ comp = 1.50 ÷ 100 × 9,000 = $135.00. Employer taxes = 688.50 + 42 + 160 + 135 = $1,025.50. Total cost = 9,000 + 1,025.50 = $10,025.50. Markup = 1,025.50 ÷ 9,000 = 11.4% — the highest of the three examples, because the capped unemployment taxes weigh more heavily on small wages. Part-time hires carry a proportionally larger tax load, which surprises many first-time employers.
How to Read Your Results
The headline — total employer cost per employee — is the number to put in your hiring budget. The summary line beneath it splits that total into gross wages and employer payroll taxes and states the tax markup, which is the figure to memorize: roughly 9–10% at these sample rates for full-time wages, higher for part-time. The table shows where the money goes — the FICA match dominates, usually 75–80% of employer taxes, while FUTA and SUTA are small but non-zero, and workers’ comp is the wildcard that depends entirely on your industry.
Use the team total when the hire is really a crew: three $40,000 associates cost $131,586 a year, not $120,000, and the $11,586 gap is the amount that sinks unbudgeted hiring plans. Remember the boundary of the estimate: it covers payroll taxes and workers’ comp only. Health insurance, retirement matches, paid time off, and payroll processing fees all sit on top — for many employers, benefits add another 15–30% beyond what this calculator shows. And Arizona’s 2.5% income tax never appears here on purpose: it is withheld from the employee’s wages and remitted by you, but it is the employee’s money, not an employer cost.
Common Payroll Cost Mistakes
The classic mistake is budgeting the salary instead of the cost: approving a $50,000 hire against a $50,000 budget line leaves you $4,777 short before benefits. A second mistake is forgetting the employer FICA match entirely — new employers sometimes assume payroll taxes are only what is withheld from the employee, then meet the quarterly deposit for the matching 7.65% as an unpleasant surprise. A third mistake is applying unemployment taxes to the full wage: FUTA and SUTA have low wage bases ($7,000 and $8,000), so they cap out fast, and modeling them as a percentage of total wages overstates the cost.
A fourth mistake is using one workers’ comp rate for every role. Comp is priced by classification code, and putting a warehouse worker on an office rate (or vice versa) can misstate the cost by thousands — get your actual class codes from your insurer. A fifth mistake is ignoring the SUTA experience rating: your rate is not fixed, and a layoff-heavy year raises it, so the sample 2.0% is a starting point, not a promise. Finally, do not confuse withholding with cost: the Arizona income tax and federal withholding you remit each payday were subtracted from the employee’s check — they cost you nothing beyond the wages themselves.
Frequently Asked Questions
1. What does the Arizona Payroll Calculator measure?
The total annual cost of employing a worker in Arizona: gross wages plus the employer’s share of FICA, FUTA, SUTA, and workers’ compensation. It answers “what does this hire really cost me?” rather than “what does the employee take home?”
2. Why is the true cost higher than the salary?
Because employers owe payroll taxes the employee never sees: a matching 7.65% FICA, federal and state unemployment taxes, and workers’ comp insurance. At the sample rates, the markup runs about 9–10% on full-time wages before any benefits.
3. What is the employer FICA match?
Employers pay the same Social Security (6.2% up to the $176,100 wage base) and Medicare (1.45% on all wages) taxes as employees — 7.65% combined. It is usually the largest single employer payroll tax, around 75–80% of the total.
4. What are FUTA and SUTA?
Federal and state unemployment insurance taxes, paid by the employer. The sample figures are 0.6% FUTA on the first $7,000 of wages and 2.0% SUTA on the first $8,000 of Arizona wages — $42 and $160 per employee per year at those rates.
5. Are the FUTA, SUTA, and workers’ comp rates exact?
No — they are editable sample figures. Your real SUTA rate depends on your unemployment claims history (experience rating), and your workers’ comp rate depends on your industry classification codes. Replace the samples with your actual rates for a precise budget.
6. Is Arizona’s 2.5% income tax an employer cost?
No. Arizona income tax is withheld from the employee’s wages and remitted by the employer, but it comes out of the employee’s pay — it adds nothing to what the hire costs you. That is why it does not appear in this calculator.
7. Why is the markup higher for part-time workers?
Because FUTA and SUTA are capped at low wage bases ($7,000 and $8,000), they cost nearly the same per head regardless of wages. On a $9,000 part-timer those fixed-ish taxes weigh more heavily, pushing the markup to about 11.4% in the example.
8. What does workers’ comp cost depend on?
Your classification codes and claims history. Office work can rate under $1 per $100 of payroll while roofing or framing can run several dollars — the $1.50 sample is a middle placeholder, so confirm your real rate with your insurer.
9. Does the calculator include benefits?
No. Health insurance, retirement plan matches, paid time off, and payroll service fees are all real employer costs that sit outside payroll taxes — often another 15–30% on top of what this tool shows. Add them separately for a complete hiring budget.
10. How should I use the team total?
When costing a group hired at the same wage — three warehouse associates, five servers — the team total gives the full annual payroll-tax load for the crew. For mixed wages, run the calculator once per wage level and add the totals.
11. Do bonuses and overtime change the result?
Yes. Employer FICA and workers’ comp apply to total wages including overtime and bonuses, so enter expected total annual wages (base plus overtime plus bonuses), not just the base salary, for an honest figure.
12. What is the Social Security wage base?
The maximum wages subject to Social Security tax — $176,100 for 2025. Neither the employee nor the employer pays the 6.2% above it, so very high earners cost slightly less in payroll tax per marginal dollar. The calculator applies the cap.
13. Employee vs. contractor — does this help compare?
It gives you the W-2 side of the comparison: the loaded cost of an employee. Contractors shift the tax burden to the worker, but compare carefully — misclassifying an employee as a contractor carries serious penalties, so the tax saving is not free.
14. When do employer payroll taxes get paid?
Generally on a monthly, semiweekly, or quarterly deposit schedule depending on your total tax liability, plus quarterly and annual filings. This calculator estimates the annual amounts; your payroll provider or accountant sets the actual deposit calendar.
15. Can I use this for multi-state employees?
Only the Arizona portion. SUTA rates, wage bases, and workers’ comp rules differ by state, so employees working in other states need those states’ figures — the FICA match and FUTA are federal and apply everywhere.
Final Thoughts
Hiring decisions made on salary alone are made on incomplete math. The Arizona Payroll Calculator puts the full picture on one card: the wage you offer plus the employer’s FICA match, unemployment taxes, and workers’ comp — the true cost of the hire. Budget the loaded number, verify your real SUTA and comp rates, and you will never again discover the markup after the fact. A hire you can afford on paper is a hire that lasts.