Exterior House Painting Cost Calculator
Estimate paint gallons, paint cost, and labor for your home’s exterior.
Repainting the outside of a house is one of the highest-impact upgrades a homeowner can make — and one of the hardest to price. Quotes vary wildly, paint quantities are easy to misjudge, and most people discover halfway through the job that they bought too little paint or budgeted too little for labor. The Exterior House Painting Cost Calculator above fixes that by turning your home’s dimensions into a complete estimate: wall area, gallons to buy, paint cost, labor cost, and the total.
Whether you are hiring a crew or doing it yourself, knowing the real numbers before you start changes every decision: which paint grade you can afford, whether two coats fit the budget, and whether a contractor’s quote is fair. This guide explains how the estimate is built, walks through a full worked example with every step of arithmetic, and shows how to read your results like a project plan.
What the Exterior House Painting Cost Calculator Does
The calculator estimates the full cost of painting your home’s exterior walls from a handful of measurements. You enter the house’s length, width, and wall height, the percentage of wall area taken up by windows and doors, how many coats you want, your paint’s coverage rating and price per gallon, and the labor rate per square foot.
From there it computes the gross wall area, subtracts the openings, multiplies by the number of coats, converts the coated area into gallons (rounding up to whole gallons you actually buy), and prices out paint and labor separately before totaling everything. The result panel shows each intermediate figure plus a numbered walkthrough of the arithmetic, so you can verify every step.
How to Use the Calculator
Measure your house’s length and width in feet — the footprint, not the lot. For wall height, measure from the ground to the eaves; for a two-story home, use the full height of both stories. The windows and doors field defaults to 15%, a solid average, but adjust it if your home is unusually glassy or solid.
Choose your coats (two is the professional standard), confirm the coverage on your paint can — 350 square feet per gallon is typical for exterior latex — and enter your paint price and labor rate. Enter 0 for labor if you are painting it yourself. Press Calculate and the estimate appears with the complete breakdown. Missing or impossible values trigger a clear error message telling you exactly what to correct.
The Formula Behind the Estimate
The estimate is built from straightforward geometry plus a little purchasing realism:
Perimeter = 2 × (length + width)
Gross wall area = perimeter × wall height
Paintable area = gross wall area × (1 − openings %)
Coated area = paintable area × number of coats
Gallons to buy = round up (coated area ÷ coverage per gallon)
Paint cost = gallons to buy × price per gallon; Labor cost = coated area × labor rate per sq ft; Total = paint cost + labor cost
Two details matter. First, gallons are rounded up because paint is sold in whole gallons — you cannot buy 6.12 gallons. Second, labor is charged on the coated area (all coats), not the wall area, because the painter paints every coat.
Worked Example: A 40 × 30 ft Home
Let us estimate a typical single-story home step by step: 40 ft long, 30 ft wide, 9 ft walls, 15% windows and doors, 2 coats, coverage 350 sq ft/gal, paint at $45/gal, labor at $1.75/sq ft.
Step 1 — perimeter. 2 × (40 + 30) = 140 ft.
Step 2 — gross wall area. 140 × 9 = 1,260 sq ft.
Step 3 — subtract openings. 1,260 × (1 − 0.15) = 1,260 × 0.85 = 1,071 sq ft of paintable wall.
Step 4 — apply coats. 1,071 × 2 = 2,142 sq ft to coat.
Step 5 — gallons. 2,142 ÷ 350 = 6.12 gallons exact, rounded up to 7 gallons to buy.
Step 6 — paint cost. 7 × $45 = $315.00.
Step 7 — labor cost. 2,142 × $1.75 = $3,748.50.
Step 8 — total. $315.00 + $3,748.50 = $4,063.50.
Enter those values into the calculator and every figure matches — including the 6.12 → 7 gallon round-up shown in the result steps.
A Second Example: DIY Changes Everything
Now take a larger two-story home: 48 ft × 32 ft, 18 ft total wall height, 18% openings, 2 coats, same 350 sq ft/gal coverage, premium paint at $58/gal, and $0 labor because the owner is doing it themselves.
Perimeter = 2 × (48 + 32) = 160 ft. Gross area = 160 × 18 = 2,880 sq ft. Minus 18% openings: 2,880 × 0.82 = 2,361.6 sq ft. Two coats: 4,723.2 sq ft. Gallons: 4,723.2 ÷ 350 = 13.49 → buy 14 gallons. Paint cost: 14 × $58 = $812. Labor: $0. Total: $812.
Compare that with hiring out at $2.00/sq ft: labor alone would be 4,723.2 × $2.00 = $9,446.40, for a total near $10,258. The example shows the two big truths of exterior painting: labor dominates professional quotes (often 80–90% of the total), and paint itself is the smaller line item — which is why upgrading to premium paint is cheap insurance when you are already paying for labor.
Understanding Your Results
The headline is your estimated total, but the rows above it are where the planning happens. Gross wall area tells you the raw size of the job. Paintable area shows what remains after windows and doors. The coated area — wall area times coats — is the number your labor quote should be based on; if a contractor’s math uses a much smaller figure, ask why.
The paint row shows both the exact gallons and the rounded-up buy quantity, so you understand the waste factor built into the purchase. Paint cost and labor cost are separated deliberately: when comparing quotes, contractors who itemize this way are easier to evaluate than lump-sum bids. The numbered steps replay the whole calculation for verification.
Common Mistakes to Avoid
The classic mistake is forgetting the second coat in the math. One coat of paint over a color change or weathered siding almost always looks patchy; budgeting paint for one coat and labor for two (or vice versa) guarantees a mid-project surprise. Always multiply the coated area, not the wall area, by your rates.
Second, do not use interior coverage ratings for exterior paint — exteriors on rough siding or stucco can drop effective coverage well below the can’s 350 sq ft/gal. When in doubt, budget an extra gallon or two. Third, remember this estimates walls only: trim, soffits, fascia, and doors are usually priced separately, so clarify with your contractor whether they are included.
Finally, measure height honestly. Eyeballing a two-story wall as “about 15 feet” when it is 18–20 feet understates the area by 20% or more. A tape measure (or a laser measure) and five minutes beat every guess.
Frequently Asked Questions
1. How many gallons of paint do I need for my house exterior?
Divide your total coated area (paintable wall area times number of coats) by the paint’s coverage rating, typically 350 sq ft per gallon, and round up to whole gallons. The calculator does this automatically — for the worked example, 2,142 sq ft ÷ 350 = 6.12 gallons, so you buy 7.
2. Why does the calculator round paint up to whole gallons?
Paint is sold in whole gallons (and quarts), so 6.12 gallons of need means buying 7 gallons. The leftover becomes your touch-up supply, which you will want anyway — exterior paint gets nicked, and having the exact batch on hand makes invisible repairs possible.
3. What does exterior house painting cost per square foot?
Professional labor typically runs $1.50 to $4.00 per square foot of coated area depending on region, prep work, and home height, with paint adding roughly $0.15–$0.35 per square foot. The calculator lets you enter your local labor rate to get a total matched to your market.
4. Are one or two coats better for exteriors?
Two coats is the professional standard and what most paint warranties require. The second coat evens out coverage, deepens color, and significantly extends the paint’s life. One coat is only sensible when repainting the same color over paint in good condition.
5. Does the estimate include trim and doors?
No — this calculator estimates wall area only. Trim, soffits, fascia, shutters, and doors are measured and priced separately (often linear feet for trim). If a contractor’s quote seems high versus this estimate, check whether it bundles those extras.
6. What percentage should I use for windows and doors?
Fifteen percent is a good default for a typical home. Glass-heavy modern designs can reach 20–25%, while small cabins with few windows may be under 10%. Count roughly if unsure — the result is not very sensitive to small errors here.
7. How do I measure wall height on a two-story house?
Measure from the ground to the eaves (where the wall meets the roof) and use the full height — do not halve it. A two-story wall is commonly 17–20 feet. Gables (triangular wall sections) add extra area this calculator does not include, so add a small allowance for them.
8. Is premium paint worth the extra cost?
Usually yes. As the worked examples show, paint is a small fraction of a professional job’s total — upgrading from $45 to $58 per gallon added only about $91 to a $4,063 project. Premium exterior paint covers better and lasts years longer, which is the cheapest longevity you can buy.
9. Why is labor so much more than the paint?
Exterior painting is labor-intensive: pressure washing, scraping, sanding, caulking, priming, masking, and working on ladders or scaffolding. Labor commonly represents 80–90% of a professional quote. That is also why DIY saves so dramatically — the second example dropped from about $10,258 to $812.
10. Should I include the garage in the measurements?
If the garage is attached and being painted, include its walls by folding them into the length and width — or simply run the calculator once for the house and once for the garage and add the totals. Detached structures are best estimated separately.
11. What paint coverage should I expect on stucco or brick?
Rough and porous surfaces drink paint: effective coverage on heavy stucco or brick can fall to 200–250 sq ft per gallon instead of the standard 350. Enter your surface’s realistic coverage in the calculator’s coverage field rather than the can’s best-case number.
12. How often should a house exterior be repainted?
Typically every 5–10 years depending on climate, sun exposure, paint quality, and surface. Wood siding in harsh sun may need it every 5–7 years; stucco with quality paint can go 8–10. Budget using this calculator each cycle so the cost never surprises you.
13. Does prep work change the estimate?
Prep work — scraping, sanding, caulking, priming — is usually baked into the labor rate rather than itemized. If your home needs heavy prep (peeling paint, rotted wood repair), expect quotes above this estimate’s labor line. Get the prep scope in writing before work starts.
14. Can I use this calculator for a fence or deck?
The geometry differs (fences are long and short), but the method is the same: measure the area, multiply by coats, divide by coverage, round up. For a fence, compute its face area directly and enter dimensions that produce the same perimeter math, or just apply the formulas from the article’s formula section.
15. How accurate is this estimate?
It is accurate for rectangular homes with the inputs given — the geometry is exact. Real quotes vary with prep needs, surface texture, gables, trim scope, and local labor markets. Treat the result as a solid planning budget and a benchmark for judging contractor quotes, not as a binding bid.
Final Thoughts
A good exterior paint job protects your home for the better part of a decade, and now you know what it should cost before anyone gives you a number. Measure your house, run the Exterior House Painting Cost Calculator, and walk into contractor conversations with the coated area, gallon count, and cost split already in hand. You will spot inflated quotes instantly, budget the right amount of paint, and — if you are doing it yourself — buy exactly what you need with touch-up paint to spare.